Samsung Washer Dryer Combo Manual

The Samsung Washer Dryer Combo is an all-in-one laundry solution featuring multiple wash and dry cycles, energy-efficient operation, smart connectivity options, steam functions, vibration reduction technology, and a large capacity drum. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Utilities 7. Using Wash & Dry Cycles 8. Smart Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Drum, Detergent Dispenser, Water Inlet Valves, Drain Pump, Lint Filter, and Power Cord.

FeatureDescription
Control PanelDigital display with touch controls for cycle selection
Drum CapacityLarge capacity drum for combined wash and dry loads
Detergent DispenserCompartments for detergent, softener, and bleach
Water Inlet ValvesHot and cold water connections
Drain PumpFor removing water after wash cycles
Lint FilterRemovable filter for lint collection
Power ButtonTurns the unit on/off
Start/PauseStarts or pauses the selected cycle
Cycle SelectorRotary knob or buttons for choosing wash/dry cycles
Options ButtonAccess additional settings like temperature, spin speed

Installation

Unpack and inspect contents. Place on a level, stable floor.

  1. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  2. Connect drain hose: Secure drain hose to standpipe or sink.
  3. Level the unit: Adjust leveling feet to prevent vibration.
  4. Plug into dedicated electrical outlet.

WARNING! Unit is heavy; use two people for moving. Ensure all connections are secure and leak-free.

First-Time Setup

Power on the unit; follow initial setup prompts.

  1. Run a test cycle: Select Quick Wash and run without laundry to clean drum.
  2. Set preferences: Use control panel to set default language, temperature units, etc.
  3. Connect to Wi-Fi: If model supports smart features, connect via Samsung SmartThings app.
  4. Load detergent: Fill dispensers with recommended detergent types.

CAUTION! Ensure unit is level and all shipping materials are removed before first use.

Specifications

Controls and Settings

Access settings via control panel or SmartThings app. Front Panel: POWER, START/PAUSE, CYCLE SELECTOR, OPTIONS.

Display: Shows cycle time, settings, and error codes.

Wash Settings: Temperature (Cold, Warm, Hot), Spin Speed (Low to High), Soil Level (Light, Normal, Heavy). Dry Settings: Dryness Level (Less Dry, Normal, More Dry), Time Dry, Air Fluff. Options: Delay Start, Child Lock, Extra Rinse, Steam Refresh. Smart Features: Remote start/pause, cycle monitoring, diagnostic alerts.

Connecting to Utilities

Water: Hot and cold inlet hoses. Drain: Hose to standpipe. Power: Dedicated outlet.

  1. Turn off water supply and power before connecting.
  2. Attach hoses to correct inlets (red for hot, blue for cold).
  3. Secure drain hose to prevent slipping or leaks.
  4. Plug into grounded outlet; avoid extension cords.

Tip: Use thread seal tape on hose connections to prevent leaks.

Using Wash & Dry Cycles

Supports combined wash/dry or separate cycles.

  1. Load laundry: Open door, place clothes loosely in drum.
  2. Add detergent: Pour into appropriate dispenser compartment.
  3. Select cycle: Turn knob or press button for desired cycle (e.g., Normal, Delicates).
  4. Set options: Adjust temperature, spin speed, dryness level if needed.
  5. Start: Press START/PAUSE; display shows remaining time.
  6. Pause/Stop: Press START/PAUSE to pause; open door to stop.
  7. Unload: Remove clothes promptly after cycle ends to prevent wrinkles.
  8. Clean lint filter: After drying cycles, clean filter to maintain efficiency.

WARNING! Do not overload drum. Use only HE (High-Efficiency) detergent.

Smart Features

Wi-Fi Connectivity: Connect via SmartThings app for remote control. Notifications: Alerts for cycle completion, maintenance reminders. Diagnostics: App provides troubleshooting tips and error code explanations.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean drum monthly with affresh® or similar cleaner.

CAUTION! Do not use abrasive cleaners; clean lint filter after every dry cycle.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star® certified for energy efficiency. Copyright © Samsung Electronics. For support, visit www.samsung.com or contact 1-800-SAMSUNG.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit not startingPower/child lockEnsure plugged in; check circuit breaker; disable child lock.
No water fillingWater supply/hosesCheck water valves are on; inspect hoses for kinks.
Excessive vibrationLeveling/loadRe-level unit; redistribute laundry load evenly.
Clothes still wetDrain/lint filterClean lint filter; check drain hose for clogs.
Error code displayedVarious faultsRefer to manual error code list; reset unit by unplugging for 1 minute.

Reset: Unplug for 1 minute or press and hold POWER for 10 seconds.

Service: 1-800-SAMSUNG; www.samsung.com/support

Samsung Washer Dryer Combo Manual © - All Rights Reserved 2025