Samsung Washer and Dryer Manuals

Samsung washers and dryers are high-efficiency laundry appliances featuring advanced technologies like EcoBubble™, Steam Sanitize+, AI-powered cycles, and SmartThings connectivity. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting for various Samsung washer and dryer models.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Smart Home 7. Using Wash & Dry Cycles 8. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Drum, Detergent Dispenser, Filter, Lint Trap (dryer), Water Inlet Valves, Drain Pump, Steam Nozzle.

Feature	Description
EcoBubble™ Technology	Mixes air, water, and detergent to create bubbles for better cleaning at lower temperatures
Steam Sanitize+	Uses steam to remove allergens and bacteria from fabrics
AI Wash	Automatically detects laundry load and soil level to optimize cycle settings
Super Speed	Washes a full load in under 30 minutes
AddWash™ Door	Allows adding forgotten items mid-cycle
SmartThings App	Remote control and monitoring via smartphone
Digital Inverter Motor	Quiet, efficient, and durable motor with 20-year warranty
Sensor Dry	Automatically detects moisture levels to prevent over-drying
Vibration Reduction Technology+	Reduces noise and vibration during spin cycles
Self Clean+	Automatically cleans the drum and detergent drawer

Installation

Unpack and inspect contents. Ensure location is level and near appropriate utilities.

Washer Installation: Connect cold and hot water hoses to inlet valves. Attach drain hose to standpipe or sink. Level using adjustable feet.
Dryer Installation: For electric models, connect to 240V outlet. For gas models, connect gas line (by licensed professional). Install vent duct to exterior.
Stacking (if applicable): Use stacking kit to secure dryer on top of washer.
Plug into appropriate power source.

WARNING! Heavy appliances; use two people for moving. Ensure all connections are secure and leak-free.

First-Time Setup

Power on appliance; follow initial setup prompts on display.

Run Initial Clean Cycle: For washer, run a clean cycle without laundry to flush system.
Connect to Wi-Fi: Use SmartThings app to connect appliance to home network for smart features.
Set Preferences: Configure default settings like temperature, spin speed, and dry level.
Test Run: Run a short cycle with a small load to verify operation.

CAUTION! Ensure water supply valves are fully open and drain hose is not kinked.

Specifications

Capacity: Washer: 4.5-5.5 cu. ft.; Dryer: 7.4-9.5 cu. ft.
Energy Rating: ENERGY STAR® certified models available.
Water Heater Connection: Hot & Cold (washer).
Power Requirements: Washer: 120V; Electric Dryer: 240V; Gas Dryer: 120V for controls, gas line for heat.
Cycle Options: Normal, Heavy Duty, Delicates, Bedding, Steam, Sanitize, Quick Wash, Rinse+Spin.
Spin Speeds: Up to 1400 RPM.
Noise Level: As low as 53 dB (washer).
Dimensions: Standard width: 27 inches; Height: 38-39 inches (washer), 70-72 inches (stacked).

Controls and Settings

Access settings via control panel or SmartThings app. Control Panel: POWER, START/PAUSE, CYCLE SELECTION KNOB, OPTION BUTTONS.

Common Settings: Temperature (Cold, Warm, Hot), Spin Speed (No Spin, Low, High), Soil Level (Light, Normal, Heavy), Dryness Level (Less Dry, Normal, More Dry).

Special Modes: Delay Start, Child Lock, Extra Rinse, Pre-Wash, Steam Refresh. Smart Features: Download additional cycles via app, receive cycle completion alerts, monitor energy usage.

Connecting to Smart Home

Connect via Wi-Fi to Samsung SmartThings ecosystem.

Download SmartThings app on smartphone or tablet.
Enable Wi-Fi on appliance (press and hold Wi-Fi button for 3 seconds).
Follow in-app instructions to add device.
Control remotely: Start/stop cycles, receive notifications, diagnose issues.

Tip: Ensure appliance is within range of your Wi-Fi router for stable connection.

Using Wash & Dry Cycles

Supports various fabric types and soil levels.

Load Laundry: Do not overload; follow capacity guidelines.
Add Detergent: Use HE detergent; pour into appropriate dispenser compartment.
Select Cycle: Turn knob or press button for desired cycle (e.g., Cotton, Synthetic, Bedding).
Select Options: Adjust temperature, spin speed, steam, etc.
Start: Press START/PAUSE. For dryer, clean lint filter before starting.
Unload Promptly: Remove items immediately after cycle ends to prevent wrinkles.

WARNING! Do not wash items soaked in flammable substances. Clean lint filter after every dryer use.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Monthly: Run Self Clean+ cycle on washer. Clean detergent dispenser and door seal.
Every 6 Months: Check and clean drain pump filter (washer). Clean dryer vent duct.
Annually: Inspect water hoses for cracks or leaks.

CAUTION! Unplug before cleaning. Use damp cloth only; do not use abrasive cleaners.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed for safety. Energy Guide labels indicate estimated yearly energy consumption. Copyright © Samsung Electronics Co., Ltd. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Door not closed, power issue	Ensure door is fully latched; check power outlet and circuit breaker.
No water entering	Water supply valves closed, kinked hoses	Open water valves; straighten inlet hoses; check for clogs.
Excessive vibration/noise	Unlevel, overloaded, transit bolts not removed	Level appliance; reduce load; ensure transit bolts are removed.
Dryer not heating	Gas supply off, vent clogged, heating element	Check gas valve; clean lint filter and vent duct; contact service for element.
Error codes displayed	Various sensor issues	Refer to manual for specific error code meaning; reset appliance.

Reset: Unplug for 1 minute, then plug back in to reset control board.

Service: 1-800-SAMSUNG; www.samsung.com/us/support