Samsung Tumble Dryer Manual

The Samsung Tumble Dryer is a high-efficiency laundry appliance designed for home use, featuring multiple drying programs, sensor drying technology, anti-crease functions, and energy-saving modes. It offers various heat settings, a large capacity drum, child lock, filter cleaning reminders, and end-of-cycle alerts. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Utilities 7. Using Drying Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Drum, Lint Filter, Heat Exchanger, Door, Power Cord, Venting Hose.

Feature	Description
Control Panel	Digital display with program selection buttons
Sensor Drying	Automatically detects moisture levels for optimal drying
Anti-Crease	Tumbles periodically after cycle to reduce wrinkles
Child Lock	Locks control panel to prevent accidental changes
Filter Clean Reminder	Indicator light alerts when lint filter needs cleaning
End-of-Cycle Alert	Audible signal when drying is complete
Energy Saver Mode	Reduces power consumption during operation
Delay Start	Set dryer to begin at a later time
Drum Light	Interior light for easy loading/unloading
Reversible Door	Door can be hinged on left or right side

Installation

Unpack and inspect contents. Place on a level, stable floor near a power outlet and venting point.

Position the dryer: Ensure adequate clearance on all sides for ventilation.
Connect venting hose: Attach hose to rear exhaust port and secure to wall vent.
Connect power: Plug into a dedicated 240V AC outlet (check local requirements).
Level the dryer: Adjust feet to prevent vibration and noise during operation.

WARNING! Dryer is heavy; use two people for lifting. Ensure venting is unobstructed to prevent fire hazard.

First-Time Setup

Plug in dryer and power on; follow initial setup prompts.

Select language: Use control panel to set display language (default: ENGLISH).
Run initial test: Select a short cycle (e.g., AIR FLUFF) to ensure proper operation.
Set preferences: Configure end-of-cycle alert volume and default drying temperature.
Activate child lock: If needed, enable from control panel.

CAUTION! Ensure dryer is properly leveled and venting is secure before first use.

Specifications

Capacity: 8 kg (dry weight).
Power Supply: 240V AC, 50/60Hz.
Energy Rating: A++ (EU energy label).
Programs: Cottons, Synthetics, Delicates, Quick Dry, Air Fluff, Wool, Anti-Crease.
Heat Settings: High, Medium, Low, No Heat.
Dimensions (HxWxD): 85cm x 60cm x 60cm.
Noise Level: ≤65 dB during operation.
Weight: 45 kg.
Venting: Requires external venting hose (included).

Controls and Settings

Access settings via control panel buttons and digital display.

Control Panel: POWER, PROGRAM SELECTOR, START/PAUSE, OPTIONS (Temperature, Time Dry, Delay Start), CHILD LOCK, FILTER CLEAN reminder reset.

Programs: Cottons (high heat), Synthetics (medium heat), Delicates (low heat), Quick Dry (30 min), Air Fluff (no heat), Wool (gentle), Anti-Crease (periodic tumbling). Options: Temperature (High/Medium/Low/No Heat), Time Dry (10-180 min), Delay Start (1-24 hrs). Settings: Language, Alert Volume, Default Program, Energy Saver On/Off.

Connecting to Utilities

Power: 240V AC outlet. Venting: External hose to wall vent.

Turn off power at mains before connecting.
Attach venting hose securely to dryer exhaust port and wall vent.
Plug power cord into dedicated outlet; ensure grounding is proper.
Check that venting path is clear and not kinked.

Tip: Use a rigid or semi-rigid venting hose for optimal airflow and safety.

Using Drying Programs

Supports various fabric types and drying needs.

Load laundry: Open door, place items loosely in drum, close door securely.
Select program: Turn PROGRAM SELECTOR to desired setting (e.g., Cottons).
Set options: Press OPTIONS to adjust temperature, time, or delay start.
Start cycle: Press START/PAUSE; display shows remaining time.
Pause/stop: Press START/PAUSE to pause; press and hold to cancel cycle.
After cycle: Remove laundry promptly; clean lint filter after each use.
Anti-crease: If enabled, dryer will tumble periodically after cycle ends.
Delay start: Set to begin drying at a later time (e.g., during off-peak hours).

WARNING! Do not overload drum; ensure items are suitable for tumble drying (check care labels).

Safety Features

Child Lock: Locks control panel to prevent accidental changes (activate via button combination). Overheat Protection: Automatically shuts off heating element if temperature exceeds safe limit. Door Safety Switch: Stops drum rotation when door is opened during operation.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every cycle. Wipe exterior with damp cloth; do not use abrasive cleaners.

Monthly Maintenance: Check venting hose for blockages; clean heat exchanger if accessible (refer to manual).

CAUTION! Never operate without lint filter; accumulated lint is a fire hazard.

Regulatory Information

Complies with IEC 60335-2-11 (safety) and EU Ecodesign regulations. Energy label: A++. Manufactured by Samsung Electronics Co., Ltd. For support, visit www.samsung.com/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Power/door	Ensure plugged in and outlet works; close door securely; check child lock.
No heat	Settings/vent	Check temperature setting; ensure venting is not blocked; reset circuit breaker.
Excessive vibration	Leveling/load	Level dryer feet; ensure load is balanced; remove heavy items.
Long drying times	Filter/vent/load	Clean lint filter; check venting for obstructions; reduce load size.
Error code on display	Sensor/component	Refer to error code list in manual; reset dryer; call service if persistent.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-SAMSUNG; www.samsung.com/support