Samsung Steam Dryer User Manual

The Samsung Steam Dryer is an advanced laundry appliance featuring steam technology for sanitizing, deodorizing, and reducing wrinkles in fabrics. It includes multiple drying cycles, sensor drying, steam refresh options, a large capacity drum, digital controls, energy-saving modes, and child lock safety features. Operates on standard household voltage. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Steam nozzle, large capacity drum, Digital Display, Control Panel, Lint Filter, Venting system, Power Cord.

Installation

Unpack and inspect contents. Place on a level, stable floor near a venting outlet.

1. Position the dryer: Ensure adequate clearance (at least 1 inch) from walls and other appliances.
2. Connect venting: Attach flexible or rigid duct to the rear exhaust port, leading to an exterior vent.
3. Connect power: Plug into a dedicated 240V outlet (for electric models) or connect gas line (for gas models) by a qualified technician.
4. Level the dryer: Adjust leveling feet to prevent vibration and noise.

WARNING! Dryer is heavy; use two people for moving. Ensure venting is secure to prevent fire hazard. Gas models must be installed by a licensed professional.

First-Time Setup

Plug in dryer; follow initial setup prompts on display.

1. Select language: Press Settings button, choose preferred language (default is ENGLISH).
2. Run initial test: Select a quick air fluff cycle to ensure proper operation and venting.
3. Set preferences: Configure End Signal volume, Energy Saver mode, and default dryness level.
4. Familiarize with controls: Review cycle guide in manual or on digital display.

CAUTION! Remove all shipping materials and tape from inside the drum before first use. Ensure the lint filter is clean.

Specifications

• Capacity: 7.5 cu. ft. (varies by model).
• Steam Function: Yes, with dedicated Steam Refresh and Sanitize cycles.
• Drying Technology: Sensor Dry, Time Dry, and Manual options.
• Control Type: Electronic with rotary dial and digital display.
• Power Requirements: Electric: 240V, 60Hz; Gas: 120V for controls, natural gas or LP.
• Venting: Requires external exhaust vent (not included).
• Dimensions (HxWxD): Approximately 43" x 29" x 32".
• Weight: Approximately 150 lbs.
• Noise Level: Standard for residential dryers.

Controls and Settings

Access settings via the Control Panel. Main Controls: POWER, CYCLE SELECTION DIAL, START/PAUSE, OPTIONS (Steam, Dryness, Delay Start), CHILD LOCK.

Display Indicators: Cycle time remaining, selected cycle, options active, error codes.

Cycle Settings: Dryness Level (Damp, Less, Normal, More, Extra), Temperature (Air Fluff, Low, Medium, High), Time (for manual cycles). Steam Options: Steam Refresh (15-30 min), Steam Sanitize (for allergen reduction). System: Language, Signal Volume, Reset to Factory Defaults.

Connecting to Utilities

Electric: Dedicated 240V outlet. Gas: Gas line connection (professional installation required). Venting: 4-inch diameter duct to exterior.

1. Turn off power/gas at source before connecting.
2. Use proper venting material (metal duct recommended, avoid plastic).
3. Ensure exhaust vent is clear of obstructions (lint, debris).

Tip: Regularly inspect and clean the exterior vent cap to maintain airflow and efficiency.

Using Drying Cycles

Supports various fabric types and load sizes.

1. Load laundry: Place clothes loosely in drum; do not overload.
2. Select cycle: Turn dial to desired cycle (e.g., Cotton, Permanent Press).
3. Set options: Press OPTIONS to select Dryness Level, Temperature, or Steam.
4. Start: Press START/PAUSE. The display will show estimated time remaining.
5. Pause/Stop: Press START/PAUSE to pause; open door to stop. Press POWER to cancel.
6. After cycle: Remove clothes promptly to minimize wrinkles. Clean lint filter.

WARNING! Do not dry items contaminated with flammable substances (gasoline, oil). Clean lint filter before every cycle to prevent fire risk.

Steam Functions

Steam Refresh: Reduces wrinkles and odors in lightly worn clothes. Steam Sanitize: Reduces allergens and bacteria on fabrics.

1. Ensure water reservoir is filled (if not connected to water line).
2. Load up to 3-5 items for best steam penetration.
3. Select "Steam Refresh" or "Steam Sanitize" cycle.
4. Press START. The cycle will add steam during the drying process.
5. Remove clothes immediately after cycle ends; they will be damp and warm.

Note: Not all fabrics are suitable for steam. Check garment labels.

Care & Cleaning

Unplug before cleaning. Wipe exterior with a soft, damp cloth. Clean lint filter after every load. Monthly: Check and clean venting system. Yearly: Inspect drum interior and seals.

CAUTION! Do not use abrasive cleaners or solvents. Never spray water or cleaners directly onto controls or into vents.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified (on eligible models). Manufactured for residential use. Copyright © Samsung Electronics. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Reset: Unplug for 1 minute, then plug back in to reset electronic controls.

Service: 1-800-SAMSUNG; www.samsung.com/us/support