Samsung Smart Care Dryer Manual

The Samsung Smart Care Dryer is a high-efficiency electric dryer featuring smart sensor technology, multiple drying cycles, steam refresh options, Wi-Fi connectivity for remote control via the SmartThings app, and energy-saving modes. It includes a spacious drum, reversible door, lint filter alert, and end-of-cycle signal. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to SmartThings 7. Using Drying Cycles 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, drum light, reversible door, lint filter, steam nozzle, and power cord.

Feature	Description
Smart Sensor Dry	Automatically detects moisture and adjusts drying time
Steam Refresh	Reduces wrinkles and odors without washing
Wi-Fi Connectivity	Remote control and monitoring via SmartThings app
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry, etc.
Reversible Door	Can be hinged on left or right side
Drum Light	Illuminates drum interior when door is open
Lint Filter Alert	Reminder to clean lint filter after each use
End-of-Cycle Signal	Audible alert when cycle completes
Energy Saver Mode	Reduces energy consumption during standby
Child Lock	Prevents accidental changes to settings

Installation

Unpack and inspect contents. Place on level floor near venting outlet.

Remove shipping materials: Remove bolts and brackets from rear.
Connect venting: Use 4-inch diameter rigid metal duct; avoid sharp bends.
Electrical connection: Plug into dedicated 240V outlet (for electric models).
Level the dryer: Adjust leveling feet to prevent vibration.
Test operation: Run a short cycle to ensure proper installation.

WARNING! Dryer is heavy; use two people for lifting. Ensure proper grounding and venting to prevent fire hazard.

First-Time Setup

Power on dryer; follow initial setup prompts on display.

Select language: Press Settings button, choose language (default ENGLISH).
Set time and date: Use numeric buttons or dial to set current time.
Connect to Wi-Fi: Navigate to Network settings, select your network, enter password.
Download SmartThings app: Pair dryer with app for remote features.
Run calibration cycle: Select "Initial Setup" cycle to calibrate sensors.

CAUTION! Ensure dryer is properly vented before first use. Keep area around dryer clear of flammable materials.

Specifications

Type: Electric Dryer (also available in gas model).
Capacity: 7.4 cu. ft. drum.
Power Requirements: 240V AC, 60Hz, 30A circuit.
Dimensions (HxWxD): 44.9" x 27.0" x 30.1".
Weight: 128 lbs.
Control: Digital touch controls with LED display.
Drying Cycles: 12 cycles including Sensor Dry, Steam, Sanitize.
Connectivity: Wi-Fi 802.11 b/g/n, 2.4GHz.
Warranty: 1-year full warranty, 10-year limited drum warranty.

Controls and Settings

Access settings via control panel or SmartThings app. Control Panel: POWER, START/PAUSE, CYCLE SELECTOR, TEMPERATURE, DRYNESS LEVEL, OPTIONS.

Display Indicators: Cycle progress, time remaining, Wi-Fi status, filter alert, child lock.

Cycle Settings: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Normal, Less Dry), Options (Wrinkle Guard, Signal Volume, Drum Light). Smart Features: Remote start/stop, cycle monitoring, energy usage tracking. Settings: Language, time/date, network, factory reset, diagnostic mode.

Connecting to SmartThings

Enables remote control and notifications.

Download SmartThings app from App Store or Google Play.
Create Samsung account or log in.
Press and hold Wi-Fi button on dryer for 3 seconds until indicator flashes.
In app, tap "+" to add device, select "Dryer", follow pairing instructions.
Once connected, control dryer remotely, receive cycle alerts, monitor energy.

Tip: Ensure dryer and mobile device are on same 2.4GHz Wi-Fi network during setup.

Using Drying Cycles

Select appropriate cycle for fabric type and drying needs.

Load dryer: Place clothes evenly in drum; do not overload.
Select cycle: Turn cycle selector knob or press cycle button.
Adjust settings: Set temperature, dryness level, and options as needed.
Start: Press START/PAUSE; display shows estimated time remaining.
During cycle: Can pause to add or remove items; press START/PAUSE again to resume.
Steam Refresh: Add water to reservoir, select Steam cycle, run for 20-30 minutes.
End of cycle: Signal sounds; remove clothes promptly to reduce wrinkles.
Clean lint filter: Remove and clean filter after every cycle.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter regularly to prevent fire risk.

Care & Maintenance

Unplug before cleaning. Wipe exterior with damp cloth; clean drum with mild detergent.

Lint filter: Clean after every use; wash with warm water monthly.
Vent system: Inspect and clean duct annually to maintain airflow.
Drum: Wipe with soft cloth; avoid abrasive cleaners.
Exterior: Use non-abrasive cleaner; dry immediately.
Steam nozzle: Descale monthly if using hard water.

CAUTION! Do not use harsh chemicals or steam cleaners on controls. Ensure dryer is unplugged during maintenance.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Energy Star certified. Copyright © Samsung Electronics Co., Ltd. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door not closed/power	Ensure door fully closed; check power cord plugged in; circuit breaker on.
Clothes not drying	Lint filter/venting	Clean lint filter; check vent for obstructions; select proper cycle.
No heat	Settings/thermal fuse	Check temperature setting; ensure not on "No Heat" cycle; contact service.
Unusual noise	Objects in drum/installation	Check for coins/objects; ensure dryer is level; tighten shipping bolts if removed.
Wi-Fi not connecting	Network/password	Check Wi-Fi signal; re-enter password; restart dryer and router.
Error codes on display	Sensor/component issue	Refer to error code chart in manual; unplug for 1 minute, restart.

Reset: Unplug for 1 minute or press and hold POWER for 10 seconds.

Service: 1-800-SAMSUNG; www.samsung.com/us/support