Samsung MultiSteam Vent Sensor Dryer Manual

The Samsung MultiSteam Vent Sensor Dryer is an advanced electric dryer featuring MultiSteam technology for reducing wrinkles and odors, Vent Sensor technology for optimal drying performance, multiple drying cycles, smart connectivity, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Drum, Lint Filter, Vent Sensor, Steam Nozzle, Power Cord, and Exhaust Vent.

Installation

Unpack and inspect contents. Ensure location is level, well-ventilated, and near appropriate power outlet.

1. Remove shipping materials: Remove all tapes, bolts, and foam from drum and interior.
2. Level the dryer: Adjust leveling feet to ensure dryer is stable and does not rock.
3. Connect venting: Use 4-inch diameter rigid metal ducting. Ensure vent is as short and straight as possible.
4. Connect power: Plug into dedicated 240V outlet. Do not use an extension cord.
5. Test installation: Run a short empty cycle to ensure proper operation.

WARNING! Dryer is heavy; use two people for moving. Ensure venting is secure to prevent fire hazard.

First-Time Setup

Power on dryer; follow initial setup prompts on display.

1. Select language: Use control dial to choose preferred language (default ENGLISH).
2. Connect to Wi-Fi: Navigate to Network settings to connect dryer to your home network for SmartThings app control.
3. Run calibration cycle: Select "Initial Setup" to allow dryer to calibrate sensors.
4. Set preferences: Configure default settings like End Signal volume and Wrinkle Prevent option.

CAUTION! Ensure dryer is properly vented before first use. Check that lint filter is clean.

Specifications

• Type: Electric Vent Sensor Dryer with Steam.
• Capacity: 7.4 cu. ft.
• Power Requirements: 240V, 60Hz, 30 Amp dedicated circuit.
• Steam Technology: MultiSteam for wrinkle reduction and odor removal.
• Sensors: Vent Sensor, EcoDry Moisture Sensor.
• Connectivity: Wi-Fi (2.4 GHz), SmartThings app compatible.
• Control: LED Display, Rotary Dial, Touch Buttons.
• Cycles: Normal, Heavy Duty, Delicates, Quick Dry, Steam Refresh, Air Fluff.
• Dimensions (HxWxD): 44.5" x 27" x 30.5".
• Weight: 125 lbs.

Controls and Settings

Access settings via control panel or SmartThings app. Control Panel: POWER, Rotary Dial (cycle selection), START/PAUSE, STEAM, OPTIONS, CHILD LOCK.

Display Indicators: Cycle progress, time remaining, Vent Alert, Wi-Fi status, settings icons.

Cycle Settings: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Less Dry), Time Dry (manual time setting). Options: Wrinkle Prevent, End Signal, Child Lock, Eco Dry. Steam Settings: Steam Refresh duration (10-30 min), Steam Sanitize option.

Connecting to Smart Devices

Connect dryer to home Wi-Fi for remote monitoring and control via SmartThings app.

1. Ensure dryer is powered on and within range of 2.4 GHz Wi-Fi network.
2. On control panel, press and hold OPTIONS button for 3 seconds to enter network setup.
3. Follow on-screen prompts to select network and enter password.
4. Open SmartThings app on smartphone, add device, and follow pairing instructions.
5. Once connected, use app to start/stop cycles, receive notifications, and monitor energy usage.

Tip: For best connectivity, ensure strong Wi-Fi signal near dryer location.

Using Drying Cycles

Select appropriate cycle for fabric type and drying needs.

1. Load dryer: Do not overload. Separate heavy items from light fabrics.
2. Select cycle: Turn rotary dial to desired cycle (Normal, Heavy Duty, Delicates, etc.).
3. Adjust settings: Press OPTIONS to set temperature, dryness level, or time.
4. Add steam: Press STEAM button for Steam Refresh or Sanitize cycle.
5. Start: Press START/PAUSE. Display shows estimated time remaining.
6. During cycle: Vent Sensor monitors airflow; EcoDry adjusts time based on moisture.
7. After cycle: Remove clothes promptly to minimize wrinkles. Use Wrinkle Prevent if delayed removal.

WARNING! Do not dry items that have been in contact with flammable substances. Clean lint filter before every load.

MultiSteam & Sensor Features

MultiSteam: Uses a small amount of water to generate steam. Reduces wrinkles by up to 30% and removes odors. Select Steam Refresh cycle (10-30 min) for lightly worn clothes. Vent Sensor: Continuously monitors exhaust airflow. If blockage is detected, cycle pauses and "Check Vent" alert appears. EcoDry Sensor: Measures moisture in drum to prevent over-drying, saving energy and protecting fabrics.

Care & Cleaning

Unplug before cleaning. Regular maintenance ensures optimal performance and safety.

1. Lint Filter: Clean before every load. Remove, rinse under water, dry completely, and reinsert.
2. Drum: Wipe interior with soft damp cloth. Do not use abrasives.
3. Exterior: Wipe with soft damp cloth. For stainless steel, use manufacturer-recommended cleaner.
4. Vent System: Inspect and clean exhaust vent at least once a year to prevent lint buildup.
5. Water Container (for steam): Empty and rinse monthly if using steam functions frequently.

CAUTION! Do not use harsh chemicals. Ensure all parts are dry before using dryer.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Samsung Electronics Co., Ltd. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Reset: Unplug dryer for 1 minute to reset electronic controls.

Service: 1-800-SAMSUNG; www.samsung.com/us/support