Samsung Heat Pump Tumble Dryer User Manual

The Samsung Heat Pump Tumble Dryer is an energy-efficient dryer that uses heat pump technology to dry clothes gently while saving energy. It features multiple drying programs, sensor drying, anti-crease, child lock, filter cleaning indicator, and quiet operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Programs 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Heat pump system, Control Panel, Lint Filter, Condenser, Water Tank, Door, Power Cord.

Feature	Description
Heat Pump Technology	Energy-efficient drying using recycled heat
Sensor Dry	Automatically detects moisture and adjusts drying time
Anti-Crease	Gentle tumbling after cycle to reduce wrinkles
Child Lock	Locks control panel to prevent accidental changes
Filter Cleaning Indicator	Alerts when lint filter needs cleaning
Multiple Programs	Cotton, Synthetic, Delicate, Quick Dry, etc.
Delay Start	Set dryer to start at a later time
Quiet Operation	Reduced noise levels during use
Digital Display	Shows remaining time, program, and settings
Reversible Door	Door can be hinged on left or right side

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove transit bolts: Use wrench to remove bolts at rear of dryer.
Level the dryer: Adjust feet to ensure dryer is level and stable.
Connect venting: Attach vent hose to rear exhaust (if required by model).
Connect to power: Plug into dedicated 220-240V AC outlet.
Check water tank: Ensure water tank is properly inserted for condensation collection.

WARNING! Dryer is heavy; lift with care or use two people. Ensure all transit bolts are removed before use.

First-Time Setup

After installation, perform initial setup.

Power on dryer: Plug in and press Power button.
Select language: Use Settings menu to choose display language.
Run initial test: Select Cotton program and run empty for 10 minutes to remove manufacturing residues.
Set preferences: Configure default settings like sound volume, end signal.
Check water tank: Ensure it's empty and properly seated.

CAUTION! Ensure dryer is properly leveled to prevent vibration and noise.

Specifications

Capacity: 8 kg (dry weight).
Technology: Heat Pump.
Energy Rating: A++ (most efficient).
Programs: Cotton, Synthetic, Delicate, Mix, Quick Dry, Anti-Crease, Time Dry.
Power Requirements: 220-240V AC, 50Hz.
Dimensions (HxWxD): 85 x 60 x 62 cm.
Noise Level: 65 dB (average).
Water Tank Capacity: 4.5 liters.
Weight: 50 kg.
Color: White.

Controls and Settings

Control Panel: POWER, PROGRAM SELECTOR, START/PAUSE, OPTIONS (Sensor Dry, Anti-Crease, Delay Start), CHILD LOCK.

Display: Shows selected program, remaining time, options, and alerts.

Programs: COTTON (high heat), SYNTHETIC (medium heat), DELICATE (low heat), MIX, QUICK DRY (30 min), TIME DRY (set manual time), ANTI-CREASE. Options: Sensor Dry (auto moisture detection), Delay Start (1-24 hours), Child Lock (press 3 sec to activate/deactivate), Sound On/Off.

Connecting to Power

Use dedicated 220-240V AC outlet with proper grounding.

Ensure dryer is off and unplugged before any electrical work.
Plug power cord into grounded outlet.
Do not use extension cords or adapters.
Check local electrical codes for compliance.

Tip: Have a qualified electrician install outlet if needed.

Using Drying Programs

Supports various fabrics and drying needs.

Load laundry: Do not overload; follow capacity guidelines.
Select program: Turn PROGRAM SELECTOR to desired setting.
Set options: Press OPTIONS for Sensor Dry, Anti-Crease, etc.
Start: Press START/PAUSE; display shows remaining time.
Pause/Stop: Press START/PAUSE to pause; press and hold to cancel.
After cycle: Remove laundry promptly; clean lint filter.
Empty water tank: After each cycle, empty condensed water.

WARNING! Do not dry rubber, plastic, or flammable items. Check pockets for objects.

Safety Features

Child Lock: Locks control panel. Overheat Protection: Automatically shuts off if overheating detected. Door Safety: Stops drum when door opened. Filter Alert: Indicates when lint filter needs cleaning.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every cycle. Wipe exterior with damp cloth; do not use abrasive cleaners. Clean condenser every month (refer to manual). Check and empty water tank regularly.

CAUTION! Do not use solvents or sprays; keep vents clear of lint buildup.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door not closed/power	Close door securely; check power outlet; ensure child lock is off.
Clothes not drying	Overloaded/filter	Reduce load; clean lint filter and condenser; check water tank.
Unusual noise	Transit bolts/objects	Ensure transit bolts removed; check for coins/objects in drum.
Error code on display	Various faults	Refer to error code list in manual; reset by unplugging for 1 minute.
Water tank full light	Tank full	Empty water tank; ensure properly inserted.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-SAMSUNG; www.samsung.com/support