Samsung Heat Pump Tumble Dryer Manual

The Samsung Heat Pump Tumble Dryer is an energy-efficient laundry appliance that uses heat pump technology to dry clothes at lower temperatures, protecting fabrics and reducing energy consumption. It features multiple drying programs, sensor drying, anti-crease function, child lock, filter cleaning indicator, and a heat exchanger self-cleaning system. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Utilities 7. Operating the Dryer 8. Special Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Heat pump system, LED control panel, lint filter, heat exchanger, drum light, moisture sensors, and condenser unit.

Feature	Description
Heat Pump Technology	Uses refrigerant cycle for efficient, low-temperature drying
Sensor Dry	Automatically detects moisture levels and adjusts drying time
Anti-Crease	Tumbles clothes without heat periodically to reduce wrinkles
Child Lock	Locks control panel to prevent accidental changes
Filter Cleaning Reminder	LED indicator alerts when lint filter needs cleaning
Self-Cleaning Condenser	Automatically cleans the heat exchanger during cycles
Multiple Programs	Cotton, Synthetic, Delicate, Wool, Quick Dry, etc.
Delay Start	Program dryer to start at a later time
Energy Rating	High energy efficiency class (A+++ typically)
Drum Light	Illuminates drum interior for easy loading/unloading

Installation

Unpack and inspect contents. Place on level, stable floor.

Remove transit bolts: Locate and remove all bolts at rear of dryer.
Choose location: Well-ventilated area, away from heat sources and moisture.
Level the dryer: Adjust feet to ensure dryer is perfectly level.
Connect to power: Plug into dedicated 220-240V AC outlet with proper grounding.
Install venting (if required): Attach vent hose to rear exhaust port.

WARNING! Dryer is heavy; use two people for moving. Ensure transit bolts are removed before operation.

First-Time Setup

Power on dryer; follow initial setup procedure.

Run initial test cycle: Select Cotton program and run empty for 20 minutes.
Set language: Press and hold Settings button to access language menu.
Configure preferences: Set time, enable sound signals, adjust default settings.
Clean filters: Ensure lint filter and heat exchanger are clean before first use.

CAUTION! Do not overload dryer. Follow load capacity guidelines in manual.

Specifications

Capacity: 8-9 kg (varies by model).
Technology: Heat pump drying system.
Energy Class: A+++ (most efficient).
Programs: Cotton, Synthetic, Delicate, Wool, Sportswear, Quick Dry, Time Dry.
Power Supply: 220-240V AC, 50Hz.
Dimensions: Standard 85cm height x 60cm width x 65cm depth.
Noise Level: 62-65 dB during operation.
Water Container: Condensed water collection tank (approx. 4L capacity).
Control: LED display with touch controls.
Special Features: Sensor Dry, Anti-Crease, Child Lock, Self-Cleaning.

Controls and Settings

Access control panel via touch buttons and rotary dial.

Control Panel: POWER, Program selector dial, Start/Pause, Delay Start, Options, Child Lock, Dry Level selection.

Programs: Select via dial (Cotton, Synthetic, Delicate, Wool, etc.). Options: Dry Level (Iron Dry, Cupboard Dry, Extra Dry), Time Dry (10-180 min), Delay Start (1-24 hours), Anti-Crease (On/Off), Signal (On/Off). Settings: Language, Time, Factory Reset. Child Lock: Press and hold Child Lock button for 3 seconds.

Connecting to Utilities

Electrical: 220-240V outlet. Venting: Optional vent hose connection.

Turn off power at mains before connecting.
Use proper vent hose if installing as vented dryer.
Ensure water container is properly inserted for condensation models.
Check that drain hose is connected if using continuous drainage option.

Tip: For best efficiency, clean lint filter before every cycle and empty water container regularly.

Operating the Dryer

Supports various fabric types and drying levels.

Load clothes: Do not exceed maximum load capacity.
Select program: Turn dial to desired program (Cotton, Synthetic, etc.).
Set options: Press Options to select Dry Level, Time Dry, Anti-Crease.
Start: Press Start/Pause button.
Monitor: LED displays remaining time; Sensor Dry adjusts automatically.
Complete: Signal sounds when cycle finishes; remove clothes promptly.
Clean filter: Remove and clean lint filter after every cycle.

WARNING! Do not dry rubber, plastic, or flammable materials. Check pockets for objects.

Special Functions

Sensor Dry: Automatically adjusts drying time based on moisture detection. Anti-Crease: Tumbles without heat for up to 2 hours after cycle ends. Child Lock: Prevents accidental program changes. Delay Start: Programs dryer to start later (1-24 hours). Self-Cleaning: Heat exchanger cleans automatically during normal cycles.

Care & Cleaning

Unplug before cleaning. Regular maintenance ensures optimal performance.

Lint filter: Clean after every cycle; wash with water monthly.
Heat exchanger: Self-cleaning function; manual cleaning may be needed annually.
Water container: Empty after every cycle; clean monthly.
Drum: Wipe with damp cloth; leave door open after use to prevent odors.
Exterior: Wipe with soft, damp cloth; do not use abrasive cleaners.

CAUTION! Never use steam cleaners or harsh chemicals. Ensure dryer is unplugged during cleaning.

Regulatory Information

CE marked: Complies with European safety standards. Energy Label: Class A+++ as per EU regulations. Waste Electrical equipment: Do not dispose with household waste; recycle appropriately. Copyright © Samsung Electronics. For support, visit www.samsung.com or contact local Samsung service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door not closed/power	Ensure door is properly closed; check power connection; reset circuit breaker.
Clothes still damp	Overloaded/filter	Reduce load size; clean lint filter and heat exchanger; check sensor function.
Unusual noise	Foreign objects/installation	Check for coins or objects in drum; ensure dryer is level; transit bolts removed.
Error code displayed	Various faults	Consult error code list in manual; common codes: E1 (door), E2 (sensor), E4 (heating).
Water container full	Container not emptied	Empty water container; ensure it's properly inserted.
Bad odor	Dirty filters/mold	Clean lint filter and heat exchanger thoroughly; run empty hot cycle with vinegar.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: Contact Samsung service center; www.samsung.com/support