Samsung Gas Dryer DVG52A5500V User Manual

The Samsung Gas Dryer DVG52A5500V is a high-efficiency, large-capacity dryer featuring gas heating, multiple drying cycles, steam refresh options, sensor drying technology, and smart connectivity. It includes safety features, energy-saving modes, and customizable settings for optimal fabric care. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Utilities 7. Operating Cycles 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LCD display, drum light, lint filter, exhaust vent, gas supply connection, power cord, and steam nozzle.

Feature	Description
Sensor Dry Technology	Automatically detects moisture levels for optimal drying
Steam Refresh Cycle	Reduces wrinkles and odors without washing
Multiple Drying Cycles	Includes Normal, Heavy Duty, Delicates, Quick Dry, and more
Wi-Fi Connectivity	Allows remote control via SmartThings app
Eco Dry Mode	Reduces energy consumption by optimizing heat and time
Drum Light	Illuminates drum interior for easy loading/unloading
Lint Filter Alert	Reminds user to clean lint filter for safety and efficiency
Child Lock	Prevents accidental changes to settings during operation
End-of-Cycle Signal	Audible alert when drying cycle is complete
Delay Start	Allows scheduling of drying cycles up to 12 hours in advance

Installation

Unpack and inspect contents. Ensure location is level, well-ventilated, and near appropriate gas and electrical outlets.

Connect gas supply: Use flexible gas connector; ensure all connections are tight and leak-free.
Connect exhaust vent: Attach 4-inch diameter rigid metal duct to rear exhaust port.
Connect power: Plug into dedicated 120V, 15A grounded electrical outlet.
Level the dryer: Adjust leveling feet to ensure drum rotates smoothly.

WARNING! Installation must be performed by a qualified technician. Gas connections require leak testing. Ensure adequate ventilation to prevent carbon monoxide buildup.

First-Time Setup

After installation, perform initial setup before first use.

Power on dryer: Plug in and press POWER button.
Set language: Navigate to SETTINGS menu, select preferred language.
Connect to Wi-Fi (optional): Use SmartThings app to connect dryer for remote features.
Run initial cycle: Run an empty "Tumble Press" cycle to remove manufacturing residues.

CAUTION! Do not place clothing or items inside during initial setup cycle. Ensure lint filter is installed correctly.

Specifications

Model: DVG52A5500V
Type: Gas Dryer
Capacity: 7.5 cu. ft.
Energy Source: Natural Gas (convertible to LP with kit)
Voltage: 120V AC, 60Hz
Control: Electronic with LCD display
Drying Cycles: 12+ including Sensor Dry, Steam, Sanitize
Exhaust: Rear exhaust, 4-inch diameter
Dimensions (HxWxD): 44.5" x 29.5" x 32.5"
Weight: 145 lbs

Controls and Settings

Access settings via control panel or SmartThings app. Front Panel: POWER, START/PAUSE, CYCLE SELECTOR, OPTIONS, CHILD LOCK.

Display: Shows cycle time, settings, and alerts. Use navigation buttons to adjust dryness level, temperature, and steam options.

Cycles: NORMAL, HEAVY DUTY, DELICATES, QUICK DRY, BEDDING, SANITIZE, STEAM REFRESH, AIR FLUFF. Options: DRYNESS LEVEL (More Dry, Less Dry, Timed), TEMPERATURE (High, Medium, Low, No Heat), STEAM (On/Off), SIGNAL (On/Off), DELAY START (1-12 hrs). Settings: Language, Wi-Fi, Factory Reset.

Connecting to Utilities

Gas: Flexible connector to 1/2-inch gas supply line. Electrical: 3-prong grounded outlet. Venting: Rigid metal duct to exterior.

Turn off gas supply at shut-off valve before connecting.
Use pipe thread sealant or Teflon tape on gas connections.
Test for leaks using soap solution; bubbles indicate leak.
Ensure exhaust vent is straight and short as possible for efficiency.

Tip: Keep dryer at least 1 inch from wall for proper ventilation. Never use plastic or foil duct material.

Operating Cycles

Supports various fabric types and drying needs.

Load dryer: Place clothes evenly in drum; do not overload.
Select cycle: Turn cycle selector to desired setting.
Adjust options: Set dryness level, temperature, steam as needed.
Start: Press START/PAUSE; dryer will begin after door closes securely.
Monitor: Display shows remaining time; sensor dry adjusts automatically.
Complete: Signal sounds; remove clothes promptly to reduce wrinkles.
Steam refresh: Add damp towel and select steam cycle for wrinkle reduction.
Delay start: Set delay before cycle begins for scheduled drying.

WARNING! Do not dry items containing foam, rubber, or plastic (e.g., pillows, shoes). Clean lint filter before every load.

Maintenance & Cleaning

Unplug before cleaning. Regular maintenance ensures efficiency and safety.

Lint filter: Clean before every load; wash monthly with warm water.
Exhaust vent: Inspect and clean annually to prevent lint buildup.
Drum: Wipe with damp cloth; avoid abrasives.
Exterior: Clean with mild detergent; dry immediately.

CAUTION! Never operate without lint filter. Do not use solvents or harsh chemicals on surfaces.

Safety Features

Overheat protection: Automatically shuts off heating element if temperature exceeds safe limit. Door switch: Stops drum rotation when door is open. Child lock: Disables control panel during operation. Gas valve: Automatically shuts off gas supply if flame is not detected.

Regulatory Information

UL listed; meets ANSI Z21.5.1 safety standards for gas dryers. Energy Star certified. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG. Copyright © Samsung Electronics America, Inc. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer will not start	Door not closed/power	Ensure door is fully closed; check power cord is plugged in; verify circuit breaker is on.
No heat	Gas supply/igniter	Check gas shut-off valve is open; ensure gas is flowing; may require technician for igniter replacement.
Clothes too wet after cycle	Lint filter/vent blocked	Clean lint filter; check exhaust vent for obstructions; select higher dryness level.
Unusual noise	Foreign objects/worn parts	Check drum for coins, buttons; ensure dryer is level; may need belt or roller replacement.
Error code on display	Sensor/component issue	Refer to error code chart in manual; unplug for 1 minute, then retry; call service if persistent.

Reset: Unplug for 1 minute, then plug back in to reset control board.

Service: 1-800-SAMSUNG; www.samsung.com/us/support