Samsung Electric Clothes Dryer Manual

The Samsung Electric Clothes Dryer is a high-efficiency appliance designed for home use, featuring multiple drying cycles, moisture sensors, wrinkle prevention options, and energy-saving modes. It operates on standard 240V AC power and includes safety features like a lint filter alarm, overheat protection, and child lock. Below are key sections covering safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Cycles 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Drum, Lint Filter, Exhaust Vent, Power Cord, Moisture Sensors, Wrinkle Guard.

Feature	Description
Control Panel	Digital display with touch buttons for cycle selection
Drum	Stainless steel interior for efficient drying
Lint Filter	Removable filter for easy cleaning
Exhaust Vent	Connects to external venting system
Power Cord	4-prong plug for 240V connection
Moisture Sensors	Automatically detects dryness level
Wrinkle Guard	Tumbles clothes periodically after cycle ends
Child Lock	Prevents accidental changes to settings
Energy Saver Mode	Reduces power consumption
Delay Start	Allows scheduling of drying cycles

Installation

Unpack and inspect contents. Place on level floor near power outlet and venting.

Position dryer: Ensure at least 1 inch clearance on all sides for ventilation.
Connect exhaust vent: Attach flexible or rigid duct to rear exhaust port.
Connect power: Plug 4-prong cord into dedicated 240V outlet.
Level the dryer: Adjust leveling feet to prevent vibration.

WARNING! Dryer is heavy; use two people for lifting. Ensure proper grounding of electrical outlet.

First-Time Setup

Plug in dryer; follow initial setup prompts.

Select language: Press SETTINGS button, choose ENGLISH (default).
Run test cycle: Use QUICK DRY cycle with empty drum to check operation.
Set preferences: Configure default dryness level, wrinkle guard, and sound settings.
Connect to Smart Home (if applicable): Use Samsung SmartThings app for Wi-Fi models.

CAUTION! Ensure exhaust vent is clear before first use to prevent fire hazard.

Specifications

Capacity: 7.4 cubic feet.
Power Requirements: 240V AC, 60Hz, 30A circuit.
Drying Cycles: Normal, Heavy Duty, Delicates, Quick Dry, Air Fluff, Sanitize.
Control Type: Electronic with LED display.
Moisture Sensor: Yes, for automatic cycle adjustment.
Wrinkle Prevention: Wrinkle Guard option.
Noise Level: ≤65 dB during operation.
Dimensions (HxWxD): 44" x 27" x 29".
Weight: 130 lbs.

Controls and Settings

Access settings via control panel buttons. Front Panel: POWER, START/PAUSE, CYCLE SELECTOR, OPTIONS, CHILD LOCK.

Display: Shows remaining time, cycle status, and error codes.

Cycles: NORMAL (cotton), HEAVY DUTY (towels/jeans), DELICATES, QUICK DRY (30 min), AIR FLUFF (no heat), SANITIZE (high heat). Options: DRYNESS LEVEL (Less Dry, Normal, More Dry), WRINKLE GUARD (On/Off), DELAY START (1-12 hours), ENERGY SAVER. Settings: Language, sound volume, default cycle, child lock (press and hold 3 seconds).

Connecting to Power

Requires dedicated 240V outlet with proper grounding.

Turn off circuit breaker before connecting.
Plug 4-prong cord into outlet (match prongs to slots).
Ensure cord is not pinched or damaged.
Turn on circuit breaker; dryer will beep once when powered.

Tip: Use only Samsung-approved power cord; do not use extension cord.

Using Drying Cycles

Supports various fabric types and dryness preferences.

Load clothes: Do not overload; leave space for tumbling.
Select cycle: Turn CYCLE SELECTOR knob to desired setting.
Set options: Press OPTIONS for dryness level, wrinkle guard, etc.
Start: Press START/PAUSE; display shows remaining time.
Pause/stop: Press START/PAUSE to pause; press again to resume. Press and hold to cancel cycle.
After cycle: Remove clothes promptly to minimize wrinkles.
Use delay start: Set DELAY START for future cycle begin.
Energy saver: Activates lower heat for reduced energy use.

WARNING! Do not dry items containing foam, rubber, or plastic (e.g., pillows). Clean lint filter after every load.

Safety Features

Child Lock: Enable by pressing and holding CHILD LOCK button for 3 seconds. Overheat Protection: Automatically shuts off heating element if temperature exceeds safe limit. Lint Filter Alarm: Alerts when filter needs cleaning. Door Safety Switch: Stops drum when door is open.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean lint filter after each load; vacuum lint around drum seal monthly.

CAUTION! Do not use abrasive cleaners; never spray water inside dryer. Ensure vent duct is cleaned annually to prevent fire risk.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified for models with energy saver mode. Copyright © Samsung Electronics Co., Ltd. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Check circuit breaker; ensure door is fully closed; press START firmly.
Clothes not drying	Lint/vent	Clean lint filter; check vent duct for blockage; select correct cycle.
Unusual noise	Objects/balance	Check for coins/objects in drum; ensure dryer is level; redistribute load.
Error code on display	Sensor/overheat	Refer to error code list in manual; reset by unplugging for 1 minute.
Overheating	Vent restriction	Clean vent duct; ensure adequate clearance around dryer.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-SAMSUNG; www.samsung.com/us/support