samsung dv90t5240aw tumble dryer manual

The Samsung DV90T5240AW is a 9kg Heat Pump Tumble Dryer featuring Digital Inverter Motor technology, Sensor Dry for precise drying, Anti-Vibration side panels, Heat Pump efficiency for lower energy consumption, a reversible door, and multiple drying programs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Utilities 7. Using Drying Programs 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Heat Pump system, Digital Inverter Motor, Control Panel, Reversible Door, Lint Filter, Water Container, Anti-Vibration Design.

Feature	Description
Heat Pump Technology	Energy-efficient drying using lower temperatures
Digital Inverter Motor	Quiet operation with 10-year warranty
Sensor Dry	Automatically detects moisture levels for optimal drying
Anti-Vibration Side Panels	Reduces noise and movement during operation
Reversible Door	Can be hinged on left or right side
Multiple Programs	Cotton, Synthetic, Delicate, Wool, Time Dry, etc.
Delay Start	Set drying to begin up to 24 hours later
Child Lock	Prevents accidental program changes
Lint Filter Indicator	Alerts when filter needs cleaning
Water Container	Collects condensed water; can be emptied manually

Installation

Unpack and inspect contents. Place on a stable, level floor.

Remove transit bolts: Use spanner to remove bolts at the rear; keep for future moves.
Level the dryer: Adjust feet to ensure machine is stable and does not vibrate excessively.
Connect to power: Plug into a grounded 220-240V AC, 50Hz outlet. Do not use an extension cord.
Ventilation: Ensure adequate space around dryer (minimum 5cm clearance at sides and back).
Optional: Connect condensed water drain hose if not using the water container.

WARNING! Dryer is heavy; lift with care or use two people. Ensure transit bolts are removed before use.

First-Time Setup

Power on dryer; follow initial setup steps.

Set language: Press and hold Start/Pause and Delay Start buttons for 3 seconds to select language.
Check water container: Ensure it is correctly inserted in its compartment.
Clean lint filter: Remove and rinse under water before first use.
Run a test cycle: Select Cotton program and run empty for 20 minutes to remove any residues.

CAUTION! Ensure the dryer is level to prevent excessive vibration and noise.

Specifications

Capacity: 9 kg.
Technology: Heat Pump.
Energy Rating: A++ (EU scale).
Motor: Digital Inverter Motor (10-year warranty).
Programs: Cotton, Synthetic, Delicate, Wool, Time Dry, Anti-Crease, etc.
Dimensions (HxWxD): 85 x 60 x 62 cm.
Power Supply: 220-240V AC, 50Hz.
Maximum Power Consumption: 1000W.
Noise Level: 65 dB (A).
Weight: 50 kg.

Controls and Settings

Access programs and settings via the control panel. Display: Shows remaining time, program, and status indicators.

Buttons: Power, Start/Pause, Program Selector, Delay Start, Options (Dry Level, Anti-Crease, Child Lock).

Programs: Cotton (High Heat), Synthetic (Medium Heat), Delicate (Low Heat), Wool (Wool-safe), Time Dry (10-180 min), Quick Dry (30 min). Options: Dry Level (Iron Dry, Cupboard Dry, Extra Dry), Anti-Crease (tumbling without heat after cycle), Child Lock (press and hold Start/Pause and Delay Start for 3 sec).

Connecting to Utilities

Power: Grounded outlet. Water Drain: Optional hose connection.

Turn off power before making any connections.
Power: Plug directly into wall outlet matching voltage requirements.
Drain: Connect hose to drain outlet at back if continuous drainage is preferred over water container.

Tip: Regularly empty the water container after each cycle to maintain efficiency.

Using Drying Programs

Supports various fabrics and drying needs.

Load laundry: Do not exceed 9 kg; ensure items are spun-dried first.
Select program: Turn Program Selector to desired setting (e.g., Cotton).
Set options: Press Options to select Dry Level, Anti-Crease, etc.
Start: Press Start/Pause. Display shows remaining time.
Delay Start: Press Delay Start to set start time (1-24 hours).
End of cycle: Signal sounds; remove laundry promptly to reduce wrinkles.
Clean lint filter: Clean after every cycle to maintain airflow and efficiency.

WARNING! Do not dry items contaminated with flammable substances. Check garment labels for drying instructions.

Care & Maintenance

Unplug before cleaning. Clean lint filter after every cycle. Wipe interior and door seal with damp cloth. Every 6 months: Check and clean heat exchanger (refer to manual). Empty water container regularly.

CAUTION! Do not use abrasive cleaners or solvents. Ensure dryer is unplugged during maintenance.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Door not closed/power	Close door securely; check power plug; ensure child lock is off.
Excessive vibration/noise	Transit bolts/leveling	Ensure transit bolts removed; check dryer is level on floor.
Clothes not drying	Lint filter/water container	Clean lint filter; empty water container; check heat exchanger.
Error code on display	Various faults	Refer to error code list in manual; common: "E1" (door open), "E2" (sensor error).
Water leakage	Hose/container	Ensure water container is correctly inserted; check drain hose connections.

Reset: Unplug for 1 minute, then restart.

Service: 0330 726 7864; www.samsung.com/uk/support