samsung dryer model dve50r5200w/a3 manual

The Samsung DVE50R5200W/A3 is a 7.4 cu. ft. Electric Dryer with Sensor Dry technology, Wrinkle Guard, Steam Refresh cycle, and multiple drying options. It features a durable stainless steel drum, reversible door, and ENERGY STAR® certification for efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power & Venting 7. Using Dryer Cycles 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control Panel, Stainless Steel Drum, Lint Filter, Reversible Door, Power Cord, Venting Kit.

Feature	Description
Sensor Dry	Automatically senses moisture and adjusts drying time
Wrinkle Guard	Tumbles clothes periodically after cycle to reduce wrinkles
Steam Refresh	Reduces wrinkles and odors without washing
Stainless Steel Drum	Durable and gentle on fabrics
Reversible Door	Can be hinged on left or right side
ENERGY STAR® Certified	Energy efficient operation
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry, etc.
Control Lock	Prevents accidental changes to settings
End of Cycle Signal	Audible alert when drying is complete
Lint Filter Alert	Reminder to clean the lint filter

Installation

Unpack and inspect contents. Place on level floor near power outlet and venting.

Remove shipping materials: Remove tape, bolts, and foam from drum interior.
Level the dryer: Adjust leveling feet to ensure dryer is stable.
Connect venting: Attach 4-inch diameter rigid metal duct to rear exhaust port.
Connect power: Plug 240V power cord into dedicated outlet (requires professional installation).
Test operation: Run a test cycle to ensure proper installation.

WARNING! Dryer is heavy; lift with care to avoid injury. Ensure proper venting to prevent fire hazard.

First-Time Setup

After installation, configure initial settings.

Select language: Press and hold Control Lock for 3 seconds, then select language.
Set time: Use the Time Dry button and number pad to set current time.
Choose signal volume: Adjust End of Cycle signal volume in settings menu.
Test cycles: Run a quick cycle with damp towels to ensure proper operation.

CAUTION! Ensure dryer is properly leveled to prevent vibration and noise.

Specifications

Capacity: 7.4 cubic feet.
Type: Electric Dryer.
Power Requirements: 240V, 60Hz, 30A.
Dimensions (HxWxD): 44.5" x 27" x 30".
Venting: 4-inch diameter rear exhaust.
Control Type: Electronic with LED display.
Drum Material: Stainless steel.
Weight: 130 lbs.
Certifications: ENERGY STAR®, UL Listed.

Controls and Settings

Access settings via control panel. Power Button: Turns dryer on/off. Cycle Selector: Choose drying cycle (Cotton, Permanent Press, Delicates, etc.). Options: Wrinkle Guard, Steam, Control Lock, Signal.

Display: Shows time remaining, cycle status, and error codes.

Drying Options: Temperature (High, Medium, Low, Air Fluff), Dryness Level (More Dry, Less Dry), Time Dry (manual time setting). Settings Menu: Language, Time, Signal Volume, Filter Reset. Steam Options: Steam Refresh, Steam Sanitize.

Connecting to Power & Venting

Power: 240V dedicated outlet. Venting: Rigid metal duct recommended.

Turn off power at circuit breaker before connecting.
Use proper venting materials (avoid plastic or foil).
Ensure venting is as short and straight as possible.
Secure all connections with clamps.

Tip: Clean lint filter before every load and inspect venting annually.

Using Dryer Cycles

Supports various fabric types and drying needs.

Load dryer: Place clothes loosely in drum, do not overload.
Select cycle: Turn cycle selector to desired setting (e.g., Cotton).
Choose options: Press buttons for Wrinkle Guard, Steam, etc.
Start: Press Start/Pause button to begin cycle.
Pause/Stop: Press Start/Pause to pause; press again to resume or hold to cancel.
End of cycle: Remove clothes promptly to reduce wrinkles.
Steam Refresh: Add damp towel and select Steam Refresh cycle.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter after every use.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every load. Wipe interior and exterior with damp cloth.

CAUTION! Do not use abrasive cleaners. Ensure venting system is clean and unobstructed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Samsung Electronics. For support, visit www.samsung.com or contact 1-800-SAMSUNG. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door open/power	Ensure door is closed; check power cord and circuit breaker.
Clothes not drying	Lint filter/venting	Clean lint filter; check venting for obstructions.
Dryer is noisy	Leveling/objects in drum	Level dryer; check for coins or objects in drum.
Error code displayed	Sensor/motor issue	Refer to error code chart in manual; reset dryer.
Steam not working	Water supply/cycle	Ensure water supply is connected; select correct steam cycle.

Reset: Unplug dryer for 1 minute, then plug back in.

Service: 1-800-SAMSUNG; www.samsung.com