samsung dryer model dve45t3200w manual

The Samsung DVE45T3200W is a 7.5 cu. ft. electric dryer with Sensor Dry technology, Wrinkle Guard, Steam Refresh, and multiple drying cycles. It features a durable stainless steel drum, reversible door, and ENERGY STAR certification. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Control Panel, Stainless Steel Drum, Lint Filter, Reversible Door, Venting System, Power Cord.

Installation

Unpack and inspect contents. Place on level floor near proper electrical outlet and venting.

1. Remove shipping materials: Take off tape, bolts, and brackets from drum and rear.
2. Level the dryer: Adjust leveling feet to ensure unit is stable and does not rock.
3. Connect venting: Attach 4-inch diameter rigid metal duct to dryer exhaust port. Ensure venting is as short and straight as possible.
4. Electrical connection: Plug into dedicated 240V, 30-amp electrical outlet. Do not use an extension cord.
5. Test installation: Run a short air-dry cycle to ensure proper operation before adding laundry.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding. Do not crush or kink vent hose.

First-Time Setup

After installation, configure initial settings.

1. Select language: Press and hold Control Lock and Temp buttons for 3 seconds to cycle through language options.
2. Set time of day: Use the Time button and dial to set current time.
3. Clean lint filter: Remove and clean filter before first use.
4. Run initial cycle: Run a quick air-dry cycle with an empty drum to clear any dust.
5. Configure preferences: Set End Signal volume, Wrinkle Guard duration, and Control Lock if desired.

CAUTION! Ensure dryer is properly leveled to prevent vibration and noise.

Specifications

• Model: DVE45T3200W
• Type: Electric Dryer
• Capacity: 7.5 cubic feet
• Dimensions (HxWxD): 43.5" x 29" x 32.5"
• Electrical Requirements: 240V, 60Hz, 30-amp dedicated circuit
• Venting: 4-inch diameter rigid metal duct recommended
• Control Type: Rotary dial with digital display
• Drum Material: Stainless steel
• Color: White
• ENERGY STAR: Yes
• Warranty: 1-year full warranty, 10-year limited warranty on drum

Controls and Settings

Access settings via control panel. Main Controls: Power, Cycle Selector Dial, Start/Pause, Temp, Dryness, Wrinkle Guard, Steam.

Display: Shows cycle time, settings, and status messages.

Cycle Selection: Turn dial to choose from Normal, Heavy Duty, Delicates, Bedding, Quick Dry, Sanitize, Air Fluff, and more. Settings: Temp (High, Medium, Low, No Heat), Dryness (More Dry, Less Dry), Time Dry (manual time setting), Wrinkle Guard (Off, 30 min, 60 min, 120 min), Steam Refresh (select cycles only). Options: Control Lock, Signal Volume, End of Cycle Signal.

Connecting to Power & Venting

Power: Dedicated 240V outlet. Venting: Rigid metal duct to exterior.

1. Turn off circuit breaker before making electrical connections.
2. Use proper gauge power cord (not included; purchase separately).
3. Connect vent duct securely to dryer and wall vent using clamps.
4. Ensure exterior vent hood opens freely and is clear of obstructions.

Tip: Clean lint from venting system at least once a year to maintain efficiency and prevent fire hazard.

Using Drying Cycles

Supports various fabric types and load sizes.

1. Load laundry: Do not overload drum. Leave space for tumbling.
2. Select cycle: Turn dial to desired cycle (e.g., Normal for cottons).
3. Adjust settings: Press Temp, Dryness, or Time Dry to customize.
4. Add optional features: Press Wrinkle Guard or Steam if needed.
5. Start: Press Start/Pause. Display shows estimated time remaining.
6. Pause/Stop: Press Start/Pause to pause; press and hold to cancel cycle.
7. Unload promptly: Remove clothes when cycle ends to minimize wrinkles.
8. Clean lint filter: Clean filter before every load for optimal performance.

WARNING! Do not dry items containing foam, rubber, or plastic. Do not use dryer for items cleaned with flammable substances.

Special Features

Sensor Dry: Automatically adjusts drying time based on moisture levels. Wrinkle Guard: Continues tumbling after cycle ends. Steam Refresh: Uses steam to reduce wrinkles and odors on lightly soiled items. Control Lock: Disables control panel to prevent accidental changes.

Care & Cleaning

Unplug before cleaning. Clean lint filter before every load. Wipe exterior with damp cloth; do not use abrasive cleaners.

Monthly: Clean lint from around drum seal and venting system. Check exterior vent hood for obstructions.

CAUTION! Do not spray water or cleaners directly onto controls. Keep area around dryer free of lint and dust.

Regulatory Information

UL Listed; complies with U.S. safety standards. ENERGY STAR partner. Copyright © Samsung Electronics America, Inc. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Reset: Unplug dryer for 1 minute, then plug back in to reset control board.

Service: 1-800-SAMSUNG; www.samsung.com/us/support