Samsung Dryer Model DV45H7000GW/A2 Manual

The Samsung DV45H7000GW/A2 is a 7.4 cu. ft. Electric Dryer featuring Steam Sanitize+ technology, Sensor Dry for precise drying, Wrinkle Guard option, multiple drying cycles, and a durable stainless steel drum. This manual provides essential information on safety, installation, operation, maintenance, and troubleshooting for optimal performance and longevity.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power & Venting 7. Using Drying Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Stainless Steel Drum, Lint Filter, Steam Nozzle, Exhaust Vent, Power Cord Connection.

Feature	Description
Steam Sanitize+	Reduces allergens and wrinkles using steam
Sensor Dry	Automatically detects moisture levels for optimal drying
Wrinkle Guard	Tumbles clothes periodically after cycle to reduce wrinkles
7.4 cu. ft. Capacity	Large drum for bulky items like comforters
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry, etc.
Stainless Steel Drum	Durable and gentle on fabrics
Control Lock	Prevents accidental changes to settings
End of Cycle Signal	Audible alert when drying is complete
Lint Filter Alert	Reminder to clean the lint filter
Energy Efficient	Meets ENERGY STAR® guidelines

Installation

Unpack and inspect contents. Ensure location is level and near proper electrical outlet and venting.

Remove shipping materials: Tape, bolts, and foam from drum interior.
Level the dryer: Adjust leveling feet using a wrench to prevent vibration.
Connect venting: Use rigid or flexible metal duct (not plastic) to exhaust outdoors.
Connect power: Plug into dedicated 240V, 30-amp electrical outlet (for electric model).
Perform test run: Run an empty cycle to ensure proper operation.

WARNING! Dryer is heavy; use two people for moving. Ensure venting is secure to prevent fire hazard.

First-Time Setup

After installation, configure initial settings.

Select language: Press and hold Control Lock and Temp. buttons for 3 seconds to cycle languages.
Set End of Cycle Signal: Use Signal button to toggle On/Off.
Set Control Lock: Press and hold Control Lock button for 3 seconds to enable/disable.
Load laundry: Do not overload; leave space for tumbling.
Select cycle: Choose appropriate cycle for fabric type.

CAUTION! Ensure dryer is properly leveled and vented before first use.

Specifications

Model: DV45H7000GW/A2
Type: Electric Dryer
Capacity: 7.4 cubic feet
Drum Material: Stainless Steel
Voltage: 240V AC
Amperage: 30 Amps
Width/Height/Depth: 27" W x 38.5" H x 31.5" D (approx.)
Weight: 130 lbs (approx.)
Technology: Sensor Dry, Steam Sanitize+, Wrinkle Guard
Color: White

Controls and Settings

Control Panel: POWER, CYCLE SELECTOR, TEMP, DRYNESS, OPTIONS (Steam, Wrinkle Guard, Signal), START/PAUSE.

Cycles: Cotton, Permanent Press, Delicates, Quick Dry, Bedding, Sanitize, Air Fluff, Timed Dry.

Settings: Temp (High, Medium, Low, No Heat), Dryness (More Dry, Normal, Less Dry), Options (Steam Refresh, Wrinkle Guard, End Signal). Install: Language selection, factory reset. Features: Control Lock, Child Lock, Lint Filter Alert.

Connecting to Power & Venting

Power: Dedicated 240V outlet. Venting: 4-inch diameter duct to outside.

Turn off circuit breaker before connecting power.
Use proper gauge power cord (not included).
Ensure vent duct is as short and straight as possible.
Secure all connections with clamps; do not use screws inside duct.
Check exterior vent flap moves freely.

Tip: Clean lint filter before every load and inspect venting annually.

Using Drying Cycles

Supports various fabrics and drying needs.

Load laundry: Sort by fabric type; do not exceed drum capacity.
Select cycle: Turn cycle selector to desired setting (e.g., Cotton).
Adjust settings: Set Temp, Dryness, and Options as needed.
Start: Press START/PAUSE. Dryer will begin, and Sensor Dry will monitor moisture.
Add steam: Press Steam button during cycle for refresh or sanitize.
Pause/Stop: Press START/PAUSE to pause; turn cycle selector to Off to cancel.
Wrinkle Guard: Enable to tumble periodically after cycle ends.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter after every cycle.

Special Features

Steam Sanitize+: Reduces up to 99.9% of allergens and bacteria. Wrinkle Guard: Tumbles clothes periodically for up to 3 hours after cycle. Control Lock: Prevents accidental button presses. Lint Filter Alert: Indicator light reminds to clean filter.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean lint filter after every load. Inspect and clean vent duct annually.

CAUTION! Do not use abrasive cleaners. Ensure dryer is disconnected from power during maintenance.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL Listed. ENERGY STAR® certified. Copyright © Samsung Electronics. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power, door, settings	Ensure plugged in, door closed, cycle selected, and START pressed.
Clothes not drying	Lint filter, vent, settings	Clean lint filter; check vent for blockage; ensure proper Temp setting.
Unusual noise	Objects in drum, leveling	Check for coins/objects; ensure dryer is level.
Error codes displayed	Sensor issues, overheating	Refer to manual for specific code (e.g., tE, dE, dF). Unplug for 1 minute, then retry.
Steam not working	Water supply, cycle	Ensure water supply connected (for steam models); select Steam cycle.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-SAMSUNG; www.samsung.com/us/support