Samsung Dryer Model DV45H7000EW/A2 Manual

The Samsung DV45H7000EW/A2 is an electric dryer with 7.4 cu. ft. capacity, featuring Sensor Dry technology, Steam Refresh cycle, Wrinkle Prevent option, Eco Dry settings, and multiple drying cycles for various fabric types. It includes a reversible door, interior drum light, end-of-cycle signal, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, lint filter, drum light, reversible door, steam nozzle, and venting system.

Feature	Description
Sensor Dry	Automatically detects moisture levels for optimal drying
Steam Refresh	Reduces wrinkles and odors without washing
Wrinkle Prevent	Tumbles intermittently after cycle to prevent wrinkles
Eco Dry	Energy-saving drying mode
Reversible Door	Door can be hinged on left or right side
Interior Drum Light	Illuminates drum interior for loading/unloading
Child Lock	Locks control panel to prevent accidental changes
End-of-Cycle Signal	Audible alert when drying is complete
Multiple Cycles	Cotton, Permanent Press, Delicates, Bedding, etc.
LED Display	Shows cycle time, settings, and status messages

Installation

Unpack and inspect contents. Place on level floor near electrical outlet and venting.

Remove shipping materials: Take off tape, bolts, and foam from drum and door.
Level the dryer: Adjust leveling feet to ensure dryer is stable and does not rock.
Connect venting: Attach 4-inch diameter rigid metal duct to rear vent outlet; ensure proper exhaust to outdoors.
Connect power: Plug into dedicated 240V, 30-amp electrical outlet (for electric model).

WARNING! Dryer is heavy; use two people for moving. Ensure venting is secure to prevent fire hazard.

First-Time Setup

After installation, perform initial setup.

Check power: Ensure dryer is plugged into correct outlet.
Clean lint filter: Remove and clean filter before first use.
Select language: Press and hold Options button for 3 seconds to set display language.
Run test cycle: Run a short cycle (like Timed Dry) with damp towels to ensure proper operation.

CAUTION! Do not use without removing shipping materials. Ensure venting is not blocked.

Specifications

Model: DV45H7000EW/A2 (Electric).
Capacity: 7.4 cubic feet.
Power Requirements: 240V, 60Hz, 30-amp circuit.
Dimensions (HxWxD): 44.5" x 29.5" x 32.5".
Drum Material: Porcelain enamel.
Control Type: Electronic with LED display.
Venting: 4-inch rear exhaust.
Special Features: Sensor Dry, Steam Refresh, Wrinkle Prevent, Eco Dry.
Warranty: 1-year limited parts and labor.

Controls and Settings

Control Panel: POWER, START/PAUSE, Cycle Selector knob, Options button, Temp button, Dryness Level button, Steam button, Wrinkle Prevent button, Child Lock button.

LED Display: Shows selected cycle, time remaining, temperature, dryness level, and error codes.

Cycles: Cotton, Permanent Press, Delicates, Bedding, Active Wear, Sanitize, Timed Dry, Air Fluff. Options: Temp (High, Medium, Low, No Heat), Dryness Level (More Dry, Less Dry), Steam (Refresh, Sanitize), Wrinkle Prevent (On/Off). Settings: Sound (On/Off), End-of-Cycle Signal (On/Off), Child Lock (press and hold for 3 seconds).

Connecting to Power

Electric model requires 240V, 30-amp dedicated circuit.

Turn off power at circuit breaker before connecting.
Use proper power cord (not included; purchase separately).
Connect cord terminals to matching terminals in dryer connection block.
Secure strain relief.
Plug into outlet and restore power.

Tip: Have a qualified electrician perform electrical connections if unsure.

Using Drying Cycles

Supports various fabric types and drying needs.

Load laundry: Do not overload; leave space for tumbling.
Select cycle: Turn Cycle Selector knob to desired cycle (e.g., Cotton).
Set options: Press Temp, Dryness Level, Steam, or Wrinkle Prevent as needed.
Start: Press START/PAUSE; display shows time remaining.
Pause/Stop: Press START/PAUSE to pause; turn knob to Off to cancel.
Unload: Remove laundry promptly after cycle ends to reduce wrinkles.
Clean lint filter: Clean after every load for efficiency and safety.

WARNING! Do not dry items contaminated with flammable substances. Clean lint filter regularly to prevent fire.

Special Features

Sensor Dry: Automatically adjusts drying time based on moisture. Steam Refresh: Adds steam during cycle to reduce wrinkles/odors. Wrinkle Prevent: Tumbles intermittently for up to 3 hours after cycle. Eco Dry: Uses lower temperatures to save energy. Child Lock: Locks control panel (press and hold Child Lock button for 3 seconds).

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean lint filter after every load. Monthly: Check and clean venting system. Yearly: Inspect drum and interior for lint buildup.

CAUTION! Do not use abrasive cleaners or solvents. Ensure dryer is unplugged during cleaning.

Regulatory Information

UL listed; complies with U.S. safety standards. Energy Star certified. Copyright © Samsung Electronics America, Inc. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Check circuit breaker; ensure door is fully closed; press START/PAUSE firmly.
No heat	Settings/breaker	Check Temp setting (not on Air Fluff); verify breaker is on; ensure vent is not blocked.
Long drying times	Lint/venting	Clean lint filter; check vent for restrictions; do not overload.
Unusual noise	Objects in drum	Check for coins, buttons in drum; ensure shipping materials are removed.
Error codes on display	Various faults	Refer to manual error code list; common: tE (temperature error), dE (door error).

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-SAMSUNG; www.samsung.com/us/support