Samsung Dryer Model DV42H5200EW/A3 Manual

The Samsung DV42H5200EW/A3 is a 7.4 cu. ft. electric dryer with Steam Refresh cycle, Wrinkle Prevent option, Sensor Dry technology, multiple drying cycles, and ENERGY STAR® certification. It features a durable stainless steel drum, LED display, end-of-cycle signal, and reversible door. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power & Venting 7. Operating the Dryer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, Stainless steel drum, Lint filter, Exhaust vent, Reversible door, Power cord (not included).

Feature	Description
Steam Refresh cycle	Reduces wrinkles and odors without washing
Sensor Dry technology	Automatically senses moisture and adjusts drying time
Wrinkle Prevent option	Tumbles clothes periodically after cycle ends to reduce wrinkles
Multiple drying cycles	Cotton, Permanent Press, Delicates, Quick Dry, Air Fluff, etc.
ENERGY STAR® certified	Energy efficient operation
LED display	Shows cycle status, time remaining, and settings
End-of-cycle signal	Audible alert when drying is complete
Reversible door	Can be hinged on left or right side
Stainless steel drum	Durable and gentle on fabrics
Lint filter	Removable for easy cleaning

Installation

Unpack and inspect contents. Place on level floor near electrical outlet and venting.

Remove shipping materials: Remove tape, bolts, and foam from drum and interior.
Level the dryer: Adjust leveling feet to ensure dryer is stable and does not rock.
Connect exhaust vent: Use 4-inch diameter rigid metal ducting; avoid plastic or flexible foil.
Electrical connection: Connect to dedicated 240V, 30-amp circuit (electric dryer).
Test operation: Run a short cycle to ensure proper installation.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding and venting to prevent fire hazard.

First-Time Setup

After installation, configure settings for first use.

Select language: Press and hold Temp. and Time buttons for 3 seconds to choose language.
Set end-of-cycle signal: Use Signal button to adjust volume or turn off.
Choose default cycle: Select preferred cycle (e.g., Cotton Normal) as default.
Test Steam Refresh: Run empty Steam cycle to clear any residual moisture from system.

CAUTION! Do not use without removing shipping materials. Ensure lint filter is installed.

Specifications

Model: DV42H5200EW/A3
Type: Electric Dryer
Capacity: 7.4 cubic feet
Dimensions (HxWxD): 44.5" x 29.375" x 31.5"
Voltage: 240V AC
Amperage: 30 amps
Exhaust Vent Diameter: 4 inches
Drum Material: Stainless steel
Control Type: Electronic with LED display
Color: White
ENERGY STAR®: Yes

Controls and Settings

Control Panel: POWER, CYCLE SELECTOR, TEMPERATURE, TIME, OPTIONS (Wrinkle Prevent, Signal, More Dry), START/PAUSE.

Cycles: Cotton, Permanent Press, Delicates, Quick Dry, Air Fluff, Steam Refresh, Sanitize, Bedding, Heavy Duty, Timed Dry.

Temperature Settings: High, Medium, Low, No Heat (Air Fluff). Time Settings: Adjustable from 10 to 180 minutes on timed cycles. Options: Wrinkle Prevent (extends tumbling after cycle), Signal (adjusts end-of-cycle alert), More Dry (adds extra drying time).

Connecting to Power & Venting

Power: Requires 240V, 30-amp dedicated circuit with proper grounding. Venting: Use rigid metal ducting; keep vent run as short and straight as possible.

Turn off power at circuit breaker before connecting.
Use proper power cord (not included) rated for dryer.
Secure all electrical connections tightly.
Ensure exhaust vent is not crushed or restricted.
Check outdoor vent flap moves freely.

Tip: Clean lint from venting annually to maintain efficiency and prevent fire risk.

Operating the Dryer

Load dryer, select cycle and options, then start.

Load clothes: Do not overload; leave space for tumbling.
Clean lint filter: Before every cycle, remove and clean lint filter.
Select cycle: Turn cycle selector to desired setting (e.g., Cotton).
Adjust settings: Use Temp. and Time buttons as needed.
Add options: Press Wrinkle Prevent, Signal, or More Dry if desired.
Start: Press START/PAUSE; dryer will begin.
Pause/stop: Press START/PAUSE to pause; open door to stop immediately.
Unload: Remove clothes promptly after cycle ends to reduce wrinkles.

WARNING! Do not dry items containing foam, rubber, or plastic (e.g., pillows, shoes). Do not use dryer if lint filter is missing or damaged.

Special Features

Steam Refresh: Reduces wrinkles and odors in 20-30 minutes; requires water connection (not included) or manual filling of water tank. Sensor Dry: Automatically stops when clothes are dry; select cycle with "Sensor" indicator. Wrinkle Prevent: Tumbles clothes without heat periodically for up to 3 hours after cycle ends.

Care & Cleaning

Unplug before cleaning. Clean lint filter before every load. Wipe exterior with damp cloth; do not use abrasive cleaners.

Monthly: Clean lint from drum, door seal, and interior. Annually: Clean exhaust vent ductwork; inspect power cord for damage.

CAUTION! Do not use solvents or spray cleaners inside dryer. Keep area around dryer free of lint and dust.

Regulatory Information

UL listed; complies with U.S. safety standards. ENERGY STAR® partner. Copyright © Samsung Electronics America, Inc. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864). Model DV42H5200EW/A3 manufactured for U.S. market.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/door	Ensure power is on; door is fully closed; circuit breaker not tripped.
Clothes not drying	Lint/venting	Clean lint filter; check vent for restrictions; ensure proper heat setting.
No heat	Settings/breaker	Check temperature setting (not Air Fluff); verify 240V power at outlet.
Unusual noise	Objects in drum	Check for coins, buttons in drum; ensure dryer is level; remove shipping materials.
Error codes on display	Various faults	Refer to manual for specific error code (e.g., tE, dE, OE).
Steam cycle not working	Water supply	Ensure water tank is filled or water line connected; check for kinks in hose.

Reset: Unplug dryer for 5 minutes, then plug back in.

Service: 1-800-SAMSUNG; www.samsung.com/us/support