Samsung Dryer Model DV42H5200EF/A3 Manual

The Samsung DV42H5200EF/A3 is a 7.4 cu. ft. electric dryer featuring Sensor Dry technology, Wrinkle Guard, Steam Refresh, multiple drying cycles, and a durable stainless steel drum. It offers energy-efficient operation, customizable settings, and advanced fabric care options. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power & Venting 7. Using Drying Cycles 8. Advanced Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Stainless Steel Drum, Lint Filter, Vent System, Power Cord, Sensor Dry System, Steam Function.

FeatureDescription
Sensor Dry TechnologyAutomatically senses moisture and adjusts drying time
Wrinkle GuardTumbles clothes periodically after cycle ends to reduce wrinkles
Steam RefreshUses steam to reduce wrinkles and odors on lightly worn clothes
Multiple Drying CyclesCotton, Permanent Press, Delicates, Quick Dry, Air Fluff, etc.
Stainless Steel DrumDurable and gentle on fabrics
7.4 cu. ft. CapacityLarge capacity for family-sized loads
Control LockPrevents accidental changes to settings
End of Cycle SignalAudible alert when drying is complete
Energy EfficientDesigned to reduce energy consumption
Lint Filter IndicatorReminder to clean the lint filter

Installation

Unpack and inspect contents. Ensure location is level and well-ventilated.

  1. Remove shipping materials: Remove all tapes, bolts, and packaging from drum and interior.
  2. Level the dryer: Adjust leveling feet to ensure dryer is stable and does not rock.
  3. Connect venting: Attach 4-inch diameter rigid metal duct to rear vent outlet; ensure proper exhaust to outdoors.
  4. Connect power: Plug into dedicated 240V, 30-amp electrical outlet (for electric model).
  5. Check operation: Run a test cycle to ensure proper installation.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding and venting to prevent fire hazard.

First-Time Setup

After installation, configure initial settings.

  1. Select language: Press and hold Control Lock and Temp buttons for 3 seconds to access language menu.
  2. Set End of Cycle Signal: Use Signal button to turn alert on/off.
  3. Set Control Lock: Press and hold Control Lock button for 3 seconds to enable/disable.
  4. Run initial cycle: Run an empty cycle on Air Fluff to remove any dust or residues.

CAUTION! Ensure dryer is properly leveled and vented before first use.

Specifications

Controls and Settings

Control Panel: Power Button, Cycle Selector, Temp Button, Dryness Level, Options (Wrinkle Guard, Signal, Steam), Start/Pause.

Cycle Selection: Turn knob to select desired cycle (Cotton, Permanent Press, Delicates, Quick Dry, Air Fluff, Bedding, Sanitize, etc.).

Temperature Settings: High, Medium, Low, Air Only (No Heat). Dryness Level: Select desired dryness (More Dry, Normal, Less Dry). Options: Wrinkle Guard (On/Off), End Signal (On/Off), Steam (Select for Steam Refresh cycle). Start/Pause: Press to start or pause cycle.

Connecting to Power & Venting

Power: Dedicated 240V, 30-amp outlet. Venting: 4-inch rigid metal duct to outdoors.

  1. Turn off power at circuit breaker before connecting.
  2. Use proper venting materials (rigid or flexible metal duct; avoid plastic).
  3. Ensure vent run is as short and straight as possible (max 25 feet).
  4. Clean lint filter before each use.

Tip: Regularly inspect vent system for lint buildup to maintain efficiency and safety.

Using Drying Cycles

Supports various fabric types and drying needs.

  1. Load dryer: Place clothes loosely in drum; do not overload.
  2. Select cycle: Turn knob to desired cycle (e.g., Cotton for towels and jeans).
  3. Set options: Adjust temperature, dryness level, and options like Wrinkle Guard.
  4. Start: Press Start/Pause button.
  5. Monitor: Sensor Dry will automatically adjust time based on moisture.
  6. Unload promptly: Remove clothes when cycle ends to minimize wrinkles.

WARNING! Do not dry items containing foam, rubber, or plastic (e.g., pillows, shoes). Clean lint filter before every load.

Advanced Features

Steam Refresh: Reduces wrinkles and odors on lightly worn clothes without washing. Select Steam Refresh cycle, load up to 3 items, and press Start. Wrinkle Guard: Tumbles clothes periodically after cycle ends for up to 3 hours. Sensor Dry: Automatically detects moisture level and adjusts drying time for energy efficiency and fabric care.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every load. Wipe exterior with damp cloth; do not use abrasive cleaners.

Monthly Maintenance: Clean lint from vent duct and rear vent area. Check exhaust hood for obstructions.

CAUTION! Never operate without lint filter. Do not use water or liquids on interior drum or controls.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified for energy efficiency. Copyright © Samsung Electronics. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

SymptomPossible CauseCorrective Action
Dryer won't startPower, door, settingsEnsure plugged in, door closed, circuit breaker on; press Start firmly.
Clothes not dryingLint, vent, settingsClean lint filter and vent system; ensure proper cycle/temp selected.
Dryer is noisyObjects in drum, levelingCheck for coins/objects; ensure dryer is level.
Error codes displayedSensor issues, overheatingRefer to error code chart in manual; unplug for 1 minute, then retry.
Steam function not workingWater supply, cycle selectionEnsure Steam Refresh cycle selected; check water supply connection (if applicable).

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-SAMSUNG; www.samsung.com/us/support

Samsung Dryer Model DV42H5200EF/A3 Manual © - All Rights Reserved 2025