Samsung Dryer Model DV25B6900EW User Manual

The Samsung DV25B6900EW is a 7.4 cu. ft. Electric Dryer featuring Sensor Dry technology, Steam Refresh cycle, Wrinkle Prevent option, Eco Dry mode, multiple drying cycles (Normal, Heavy Duty, Delicates, etc.), adjustable temperature settings, end-of-cycle signal, child lock, and vent blockage alert. Operates on 240V, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power & Venting 7. Using Drying Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Drum, Lint Filter, Exhaust Vent, Power Cord, Steam Nozzle (if equipped).

FeatureDescription
Sensor DryAutomatically detects moisture and adjusts drying time
Steam RefreshReduces wrinkles and odors without washing
Wrinkle PreventTumbles intermittently after cycle to prevent wrinkles
Eco DryEnergy-saving mode using lower temperatures
Multiple CyclesNormal, Heavy Duty, Delicates, Quick Dry, etc.
Adjustable TemperatureHigh, Medium, Low, Air Fluff settings
Child LockLocks control panel to prevent accidental changes
Vent Blockage AlertAlerts if airflow is restricted
End-of-Cycle SignalAudible signal when drying is complete
Large Capacity Drum7.4 cu. ft. stainless steel drum

Installation

Unpack and inspect contents. Place on level floor.

  1. Location: Ensure adequate clearance (at least 1" rear, 2" sides).
  2. Venting: Connect 4-inch diameter rigid metal duct to exhaust vent; avoid sharp bends.
  3. Electrical: Connect to dedicated 240V, 60Hz outlet with proper grounding.
  4. Leveling: Adjust leveling feet to ensure dryer is stable.

WARNING! Dryer is heavy; use two people for moving. Ensure venting is secure to prevent fire hazard.

First-Time Setup

After installation, perform initial setup.

  1. Check lint filter: Ensure it is clean and properly seated.
  2. Power on: Plug into outlet; press POWER button.
  3. Select language: If applicable, set display language.
  4. Run test cycle: Run an empty cycle on Normal to ensure proper operation.

CAUTION! Do not use without proper venting. Ensure electrical connection matches dryer requirements.

Specifications

Controls and Settings

Control Panel: POWER, CYCLE SELECTOR, TEMPERATURE, OPTIONS (Wrinkle Prevent, Signal), START/PAUSE.

Cycle Selection: Turn knob or press buttons to select desired cycle.

Temperature: Adjust per cycle (High, Medium, Low, Air Fluff). Options: Wrinkle Prevent (On/Off), End Signal (On/Off), Child Lock (press and hold 3 seconds). Steam Refresh: Select cycle and press Steam button if available.

Connecting to Power & Venting

Power: 240V outlet. Venting: 4-inch rigid metal duct.

  1. Turn off power at circuit breaker before connecting.
  2. Connect power cord to terminal block as per wiring diagram.
  3. Attach vent duct to dryer exhaust; secure with clamp.
  4. Ensure outdoor vent hood is clear of obstructions.

Tip: Clean lint filter before every load and inspect venting annually.

Using Drying Cycles

Supports various fabrics and drying needs.

  1. Load clothes: Do not overload; leave space for tumbling.
  2. Select cycle: Turn knob to desired cycle (e.g., Normal for cottons).
  3. Adjust settings: Set temperature, options like Wrinkle Prevent.
  4. Start: Press START/PAUSE; dryer will begin.
  5. Monitor: Sensor Dry will automatically adjust time.
  6. Complete: Remove clothes promptly to reduce wrinkling.

WARNING! Do not dry items contaminated with chemicals, oils, or flammable substances. Clean lint filter after every load.

Special Features

Steam Refresh: Reduces wrinkles and odors; add water to reservoir if required. Eco Dry: Uses lower temperatures for energy savings. Child Lock: Prevents accidental changes; activate via control panel.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every load. Wipe exterior with damp cloth; do not use abrasive cleaners.

CAUTION! Do not spray water or cleaners into vents or controls. Regularly inspect and clean vent duct to prevent fire.

Regulatory Information

UL Listed; complies with U.S. safety standards. Copyright © Samsung Electronics. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG.

Troubleshooting

SymptomPossible CauseCorrective Action
Dryer won't startPower/doorsEnsure plugged in, door closed, circuit breaker on.
Clothes not dryingLint/ventingClean lint filter; check vent for blockage; ensure proper cycle selected.
No heatSettings/heating elementCheck temperature setting; ensure not on Air Fluff; if issue persists, contact service.
Unusual noiseObjects in drumCheck for coins, buttons; ensure dryer is level.
Error codes displayedVariousRefer to manual for specific error code meaning; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute to reset electronic controls.

Service: 1-800-SAMSUNG; www.samsung.com/us/support

Samsung Dryer Model DV25B6900EW User Manual © - All Rights Reserved 2025