Samsung Dryer Model DV210AEW XAA Manual

The Samsung DV210AEW XAA is a 7.4 cu. ft. electric dryer with Sensor Dry technology, Wrinkle Guard, Eco Dry option, and multiple drying cycles. It features a durable stainless steel drum, end-of-cycle signal, and reversible door. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Cycles 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, stainless steel drum, lint filter, exhaust vent, reversible door, and power cord.

Feature	Description
Sensor Dry	Automatically detects moisture and adjusts drying time
Wrinkle Guard	Tumbles clothes periodically after cycle to reduce wrinkles
Eco Dry	Energy-saving drying option
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry, etc.
Stainless Steel Drum	Durable and gentle on fabrics
Reversible Door	Can be hinged on left or right side
End-of-Cycle Signal	Audible alert when drying is complete
Lint Filter	Removable for easy cleaning
Digital Display	Shows cycle status, time remaining, and options
Child Lock	Prevents accidental changes to settings

Installation

Unpack and inspect contents. Place on a level, stable surface near a proper power outlet and venting.

Remove shipping materials: Take off all tape, bolts, and brackets from drum and interior.
Level the dryer: Adjust leveling feet to ensure dryer is stable and does not rock.
Connect exhaust vent: Use rigid or flexible metal ducting (not plastic) to vent outdoors.
Connect power: Plug into a dedicated 240V, 30-amp electrical outlet (for electric model).
Test operation: Run a short cycle to ensure proper installation.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding and venting to prevent fire hazard.

First-Time Setup

After installation, configure initial settings.

Select language: Press and hold Options button to access language menu (if applicable).
Set time of day: Use Timer or Clock button to set current time.
Choose default settings: Select preferred dryness level and cycle defaults.
Test Sensor Dry: Run a load with Sensor Dry to ensure proper moisture detection.

CAUTION! Ensure lint filter is installed and venting is clear before first use.

Specifications

Model: DV210AEW XAA
Type: Electric Dryer
Capacity: 7.4 cubic feet
Dimensions (HxWxD): Approximately 44" x 27" x 30"
Power Requirements: 240V, 60Hz, 30-amp circuit
Drum Material: Stainless Steel
Control Type: Electronic with digital display
Vent Type: Rear exhaust (4-inch diameter)
Weight: Approximately 130 lbs
Color: White

Controls and Settings

Access settings via control panel buttons and dial.

Control Panel: POWER, START/PAUSE, Cycle Selector Dial, Options (Wrinkle Guard, Eco Dry, Signal), Temp, Dryness, Time Dry.

Cycles: Cotton, Permanent Press, Delicates, Quick Dry, Air Fluff, Timed Dry. Options: Wrinkle Guard (On/Off), Eco Dry (energy save), End Signal (volume), Child Lock. Settings: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Less Dry), Time Dry (10-180 minutes).

Connecting to Power

Electric connection: 240V, 30-amp dedicated circuit.

Turn off power at circuit breaker before connecting.
Use proper power cord (not included; purchase separately).
Connect wires to terminal block: L1, L2, Neutral, Ground as per wiring diagram.
Secure strain relief and plug into outlet.
Restore power and test.

Tip: Have a qualified electrician perform electrical connections if unsure.

Using Drying Cycles

Supports various fabrics and drying needs.

Load clothes: Do not overload; leave space for tumbling.
Select cycle: Turn dial to desired cycle (e.g., Cotton, Permanent Press).
Set options: Press Options for Wrinkle Guard, Eco Dry, etc.
Set dryness/temp: Use Temp and Dryness buttons.
Start: Press START/PAUSE.
Pause/stop: Press START/PAUSE to pause; turn dial to Off to cancel.
After cycle: Remove clothes promptly; clean lint filter.

WARNING! Do not dry items contaminated with chemicals, oils, or flammable substances.

Maintenance & Cleaning

Unplug before cleaning. Clean lint filter after every load. Regularly clean exhaust vent and interior.

Lint filter: Remove, clean with brush, rinse if needed, dry completely.
Exhaust vent: Disconnect and clean duct annually to prevent lint buildup.
Drum: Wipe with damp cloth; avoid abrasives.
Exterior: Wipe with soft, damp cloth; mild detergent if needed.

CAUTION! Do not use harsh chemicals or steam cleaners. Ensure dryer is unplugged.

Regulatory Information

UL listed; complies with U.S. safety standards. Energy Guide label provides estimated energy consumption. Copyright © Samsung Electronics. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power, door, settings	Ensure plugged in, door closed, circuit breaker on, START pressed.
No heat	Settings, heating element	Check temp setting (not Air Fluff); verify power; may need service.
Clothes too wet	Overload, lint, sensor	Reduce load; clean lint filter; ensure Sensor Dry selected.
Excessive noise	Objects in drum, installation	Check for coins, buttons; ensure dryer is level.
Error codes (e.g., tE, dE)	Sensor issues	Unplug for 5 minutes; replug. If persists, call service.

Reset: Unplug for 1 minute to reset electronic controls.

Service: 1-800-SAMSUNG; www.samsung.com/us/support