Samsung Dryer Instruction Manual

The Samsung Dryer is a high-efficiency electric or gas dryer featuring multiple drying cycles, temperature settings, moisture sensors, wrinkle prevention options, and smart connectivity. Designed for household use, it offers energy-saving modes, child safety locks, and easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Utilities 7. Using Drying Cycles 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Drum, Lint Filter, Exhaust Vent, Power Cord or Gas Line Connection, Moisture Sensors, Wrinkle Guard.

FeatureDescription
Control PanelDigital display with cycle selection and settings
DrumStainless steel interior for efficient drying
Lint FilterRemovable filter for easy cleaning
Exhaust VentConnects to external venting system
Moisture SensorsAutomatically detects dryness level
Wrinkle GuardTumbles clothes periodically after cycle ends
Child LockPrevents accidental changes to settings
Energy Saver ModeReduces energy consumption
Smart ConnectivityWi-Fi enabled for remote control via app
POWERTurns dryer on/off

Installation

Unpack and inspect contents. Place on level floor near venting outlet.

  1. Connect exhaust vent: Attach flexible or rigid duct to dryer exhaust port.
  2. Connect power: For electric models, plug into dedicated 240V outlet. For gas models, connect gas line with shut-off valve.
  3. Level the dryer: Adjust leveling feet to ensure stability.
  4. Check connections: Ensure all connections are secure before use.

WARNING! Dryer is heavy; lift with care to avoid injury. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

Power on dryer; follow initial setup prompts.

  1. Select language: Use control panel to set display language (default ENGLISH).
  2. Set time and date: Configure for timed drying cycles.
  3. Connect to Wi-Fi: For smart models, follow app instructions for pairing.
  4. Run test cycle: Use empty drum to ensure proper operation.

CAUTION! Ensure dryer is properly leveled and vented before first use.

Specifications

Controls and Settings

Access settings via control panel or smart app. Front Panel: POWER, START/PAUSE, CYCLE SELECTION, TEMPERATURE, OPTIONS.

Display: Shows cycle time, settings, and status messages.

Cycles: NORMAL, DELICATES, HEAVY DUTY, QUICK DRY, AIR FLUFF. Temperature: HIGH, MEDIUM, LOW, NO HEAT. Options: WRINKLE GUARD, CHILD LOCK, ENERGY SAVER, SENSOR DRY. Settings: Language, Time, Wi-Fi, Sound Volume.

Connecting to Utilities

Electric: 240V outlet. Gas: Gas line with shut-off valve. Vent: 4-inch diameter exhaust duct.

  1. Turn off power/gas before connecting.
  2. Use proper duct material (metal recommended).
  3. Ensure venting is direct and unobstructed.

Tip: Consult a professional for gas line installation if unsure.

Using Drying Cycles

Supports various fabrics and dryness levels.

  1. Load clothes: Do not overload; leave space for tumbling.
  2. Select cycle: Choose based on fabric type (e.g., DELICATES for gentle drying).
  3. Set temperature: Adjust for fabric care requirements.
  4. Start dryer: Press START/PAUSE; cycle begins.
  5. Monitor: Moisture sensors adjust time automatically.
  6. End of cycle: Signal sounds; Wrinkle Guard may activate.
  7. Clean lint filter: Remove lint after every cycle.

WARNING! Do not dry items contaminated with chemicals or flammable substances.

Safety Features

Child Lock: Disables control panel to prevent accidental changes. Overheat Protection: Automatically shuts off if temperature exceeds safe limit. Door Safety Switch: Stops drum when door is open.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every use. Wipe exterior with damp cloth; do not use abrasive cleaners.

CAUTION! Regularly inspect and clean exhaust vent to prevent lint buildup and fire risk.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed for safety. Energy Star certified on select models. Copyright © Samsung Electronics Co., Ltd. For support, visit www.samsung.com or contact 1-800-SAMSUNG.

Troubleshooting

SymptomPossible CauseCorrective Action
Dryer does not startPower/gas supply, doorEnsure power/gas is on; close door securely; check circuit breaker.
Clothes not dryingLint filter, vent blockageClean lint filter; check exhaust vent for obstructions.
Unusual noiseForeign objects, levelingCheck drum for objects; ensure dryer is level.
Error code displayedSensor issue, overloadRefer to manual for code meaning; reduce load size.
Smart features not workingWi-Fi connectionCheck Wi-Fi network; restart dryer and router.

Reset: Unplug for 1 minute, then reconnect to reset electronic controls.

Service: 1-800-SAMSUNG; www.samsung.com/support

Samsung Dryer Instruction Manual © - All Rights Reserved 2025