samsung dryer dvg50r5200w manual

The Samsung DVG50R5200W is a 7.5 cu. ft. Electric Dryer with Sensor Dry technology, Wrinkle Guard, Steam Refresh cycle, and multiple drying options. It features a durable stainless steel drum, reversible door, and ENERGY STAR® certification. Below are key sections for safety, features, installation, setup, operation, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Dryer Cycles 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, Stainless steel drum, Lint filter, Reversible door, Venting system, Power cord (not included).

Feature	Description
Sensor Dry	Automatically detects moisture levels for optimal drying
Wrinkle Guard	Tumbles intermittently after cycle to reduce wrinkles
Steam Refresh	Reduces wrinkles and odors without washing
Stainless Steel Drum	Durable and gentle on fabrics
Reversible Door	Can be hinged on left or right side
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry, etc.
ENERGY STAR®	Energy efficient operation
Control Lock	Prevents accidental changes to settings
End of Cycle Signal	Audible alert when drying is complete
Lint Filter Indicator	Reminder to clean lint filter

Installation

Unpack and inspect contents. Place on a level, stable floor near a power outlet and venting location.

Remove shipping materials: Take off tape, bolts, and foam from drum and door area.
Level the dryer: Adjust leveling feet to ensure dryer is stable and does not rock.
Connect venting: Attach a 4-inch diameter rigid metal duct to the dryer exhaust outlet and vent to outdoors.
Electrical connection: Have a qualified electrician install a 240V, 30-amp power outlet and connect the dryer's power cord (cord sold separately).
Test operation: Plug in, run a test cycle to ensure proper installation.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding and venting to prevent fire hazard.

First-Time Setup

After installation, configure initial settings.

Select language: Press and hold Control Lock and Temp. buttons for 3 seconds to cycle through languages on display.
Set End of Cycle Signal: Use Signal button to turn alert On or Off.
Clean lint filter: Remove and clean the lint filter before first use.
Run an empty cycle: Select a timed dry cycle on high heat for 20 minutes to remove any manufacturing residues.

CAUTION! Ensure the dryer is properly leveled and vented before first use.

Specifications

Model: DVG50R5200W
Type: Electric Dryer
Capacity: 7.5 cubic feet
Dimensions (HxWxD): 44.5" x 29.5" x 32.5"
Voltage: 240V AC, 60Hz
Amperage: 30 Amps
Drum Material: Stainless Steel
Control Type: Electronic with LED Display
Vent Type: Rear exhaust (4-inch)
Certifications: ENERGY STAR®, UL Listed

Controls and Settings

Control Panel: POWER, CYCLE SELECTOR, TEMP, DRYNESS, OPTIONS (Wrinkle Guard, Steam), START/PAUSE, SIGNAL, CONTROL LOCK.

Cycles: Cotton, Permanent Press, Delicates, Quick Dry, Bedding, Heavy Duty, Sanitize, Air Fluff, Steam Refresh, Timed Dry.

Settings: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Normal, Less Dry), Options (Wrinkle Guard, Steam, Delay Start).

Display: Shows cycle time, settings, and status messages.

Connecting to Power

Requires a dedicated 240V, 30-amp circuit with proper grounding.

Turn off power at the circuit breaker.
Have a qualified electrician install the correct power outlet (NEMA 10-30R or 14-30R).
Connect the 4-prong power cord (purchased separately) to the dryer's terminal block.
Plug the dryer into the outlet and restore power at the breaker.

Tip: Never use an extension cord or adapter. Ensure the power cord matches the outlet type.

Using Dryer Cycles

Follow fabric care labels and sort laundry by fabric type and weight.

Load dryer: Do not overload. Leave space for tumbling.
Select cycle: Turn cycle selector to desired setting (e.g., Cotton).
Adjust settings: Press TEMP and DRYNESS to customize.
Add options: Press OPTIONS for Wrinkle Guard or Steam if needed.
Start: Press START/PAUSE. The display will show estimated time remaining.
Pause/Stop: Press START/PAUSE to pause; press again to resume. To cancel, press and hold START/PAUSE for 3 seconds.
Clean lint filter: Remove and clean lint filter after every cycle.

WARNING! Do not dry items that have been in contact with flammable substances. Clean lint filter regularly to prevent fire.

Maintenance & Cleaning

Unplug dryer before cleaning. Regularly clean lint filter, drum, and exterior.

Lint Filter: Clean after every load. Rinse with water monthly and let dry completely.
Drum: Wipe with a damp cloth. Use a mild detergent if needed.
Exterior: Wipe with a soft, damp cloth. Do not use abrasive cleaners.
Venting System: Inspect and clean the exhaust duct annually to maintain efficiency and safety.

CAUTION! Do not use harsh chemicals or spray liquids directly on controls. Ensure lint filter is completely dry before reinserting.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Manufactured under license from Samsung Electronics Co., Ltd. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door not closed, power issue, control lock on	Close door firmly, check power outlet and breaker, turn off Control Lock.
No heat	Cycle set to "No Heat", heating element issue	Select a cycle with heat, ensure proper voltage, contact service if needed.
Clothes too wet after cycle	Overloaded, lint filter clogged, incorrect settings	Reduce load size, clean lint filter, select correct dryness level.
Unusual noise	Foreign object in drum, dryer not level	Check drum for objects, ensure dryer is level on floor.
Error code on display	Sensor issue, vent blockage, component failure	Refer to error code chart in manual; check venting; reset dryer by unplugging for 1 minute.

Reset: Unplug dryer for 1 minute to reset electronic controls.

Service: 1-800-SAMSUNG; www.samsung.com/us/support