Samsung Dryer DVG45T6000W Manual

The Samsung DVG45T6000W is a 7.5 cu. ft. Electric Dryer with SteamSanitize+ technology, Sensor Dry system, Wrinkle Guard, and Wi-Fi connectivity. It features multiple drying cycles, energy-saving modes, and smart diagnostics. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power & Venting 7. Using Drying Cycles 8. Smart Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with LCD display, lint filter, drum light, steam nozzle, venting system, and power cord.

Feature	Description
SteamSanitize+	Reduces allergens and wrinkles using steam
Sensor Dry	Automatically senses moisture and adjusts drying time
Wrinkle Guard	Tumbles clothes periodically after cycle to reduce wrinkles
Wi-Fi Connectivity	Control and monitor dryer via SmartThings app
Multiple Cycles	Cotton, Permanent Press, Delicates, Bedding, etc.
Energy Saver	Uses lower heat for energy efficiency
Drum Light	Illuminates drum interior when door is opened
Lint Filter Indicator	Alerts when lint filter needs cleaning
Child Lock	Locks control panel to prevent accidental changes
End of Cycle Signal	Audible alert when cycle completes

Installation

Unpack and inspect contents. Ensure location is level and near proper electrical outlet and venting.

Remove shipping materials: Remove tape, bolts, and foam from drum and interior.
Level the dryer: Adjust leveling feet to ensure dryer is stable and level.
Connect venting: Use 4-inch diameter rigid metal duct; avoid plastic or flexible foil.
Electrical connection: Connect to dedicated 240V, 30-amp circuit (for electric model).
Test operation: Run a test cycle to ensure proper installation.

WARNING! Dryer is heavy; use two people for moving. Ensure venting is secure to prevent fire hazard.

First-Time Setup

Plug in dryer; follow initial setup prompts on display.

Connect to Wi-Fi: Press and hold Wi-Fi button; follow app instructions for SmartThings setup.
Set preferences: Select language, signal volume, and default cycle settings.
Run initial cycle: Run an empty cycle on Normal Dry to clear any dust.
Download SmartThings app: For remote monitoring and control.

CAUTION! Ensure dryer is properly vented before first use to prevent overheating.

Specifications

Capacity: 7.5 cubic feet.
Type: Electric Dryer (Model DVG45T6000W).
Power Requirements: 240V, 60Hz, 30-amp dedicated circuit.
Steam Function: Yes, with SteamSanitize+.
Control: Electronic touch controls with LCD display.
Drum: Porcelain enamel interior with interior light.
Venting: 4-inch diameter rear exhaust.
Dimensions (HxWxD): 44.5" x 29.5" x 33.5".
Weight: 140 lbs.
Warranty: 1-year limited parts and labor.

Controls and Settings

Access settings via control panel or SmartThings app. Control Panel: POWER, CYCLE SELECTOR, OPTIONS, START/PAUSE.

Display: Shows cycle time, settings, and alerts. Cycles: Normal, Heavy Duty, Delicates, Quick Dry, Steam Refresh, Bedding, etc. Options: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Less Dry), Wrinkle Guard, Child Lock, Signal Volume.

Smart Features: Wi-Fi setup, remote start, cycle monitoring, diagnostic alerts.

Connecting to Power & Venting

Power: Dedicated 240V outlet. Venting: Rigid metal duct to exterior.

Turn off power at circuit breaker before connecting.
Use proper venting material (rigid metal) and keep duct as short and straight as possible.
Secure all connections with clamps; ensure exterior vent flap moves freely.
Check for proper airflow after installation.

Tip: Clean lint filter before every load and inspect venting annually.

Using Drying Cycles

Supports various fabric types and drying needs.

Load dryer: Do not overload; leave space for tumbling.
Select cycle: Turn cycle selector to desired setting (e.g., Normal, Permanent Press).
Set options: Adjust temperature, dryness level, and options like Wrinkle Guard.
Start: Press START/PAUSE; display shows remaining time.
Steam cycles: Add water to reservoir for SteamSanitize+ or Steam Refresh cycles.
End of cycle: Remove clothes promptly to minimize wrinkles.

WARNING! Do not dry items containing foam, rubber, or plastic; may cause fire.

Smart Features

Wi-Fi Connectivity: Monitor and control dryer remotely via SmartThings app. Receive alerts when cycle ends or if issues arise. Smart Diagnostics: App can run tests and provide troubleshooting steps.

Care & Maintenance

Unplug before cleaning. Clean lint filter after every load. Wipe interior and exterior with damp cloth; do not use abrasive cleaners. Check and clean venting system annually.

CAUTION! Never operate without lint filter. Ensure venting is not blocked.

Regulatory Information

UL listed; complies with U.S. safety standards. Energy Star certified. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG. Model DVG45T6000W.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/ door	Ensure power is on; door is fully closed; circuit breaker not tripped.
No heat	Settings/ heating element	Check temperature setting; ensure cycle includes heat; verify power supply.
Clothes too wet	Overloading/ venting	Reduce load size; clean lint filter; check vent for blockages.
Unusual noise	Objects in drum/ installation	Check for coins or objects; ensure dryer is level; inspect drum rollers.
Error codes on display	Various issues	Refer to error code chart in manual; use Smart Diagnostics in app.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-SAMSUNG; www.samsung.com/us/support