Samsung Dryer DVE52A5500C Manual

The Samsung DVE52A5500C is an electric dryer with a 7.5 cu. ft. capacity, featuring Sensor Dry technology, Steam Refresh cycle, Wrinkle Prevent option, multiple drying cycles (Normal, Heavy Duty, Delicates, etc.), adjustable temperature settings, end-of-cycle signal, and a reversible door. It requires a 240V electrical outlet. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, lint filter, drum light, reversible door, exhaust vent, power cord.

Feature	Description
Sensor Dry	Automatically detects moisture levels for optimal drying
Steam Refresh	Reduces wrinkles and odors without a full wash
Wrinkle Prevent	Tumbles intermittently after cycle to prevent wrinkles
Multiple Cycles	Normal, Heavy Duty, Delicates, Quick Dry, Air Fluff
Adjustable Temperature	High, Medium, Low, No Heat settings
Reversible Door	Door can be hinged on left or right side
End-of-Cycle Signal	Audible alert when drying is complete
Drum Light	Interior light for easy loading/unloading
Lint Filter	Removable filter for easy cleaning
Digital Display	Shows cycle status, time remaining, and settings

Installation

Unpack and inspect contents. Ensure location is level and well-ventilated.

Remove shipping materials: Take off tape, bolts, and foam from drum and door.
Level the dryer: Adjust leveling feet to prevent vibration and noise.
Connect exhaust vent: Use rigid or flexible metal ducting (do not use plastic).
Connect power: Plug into dedicated 240V outlet (NEMA 14-30R).
Test operation: Run a short cycle to verify proper installation.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding and venting to prevent fire hazard.

First-Time Setup

After installation, configure initial settings.

Select language: Press and hold Options button for 3 seconds, choose language.
Set end-of-cycle signal: Use Sound menu to adjust volume or turn off.
Choose default cycle: Select preferred cycle (Normal is default).
Set child lock: Enable to prevent accidental changes during operation.

CAUTION! Ensure dryer is properly leveled and vented before first use.

Specifications

Capacity: 7.5 cubic feet.
Type: Electric dryer.
Power Requirements: 240V AC, 60Hz, 30A circuit.
Dimensions (HxWxD): 44.5" x 29" x 33.5".
Weight: 145 lbs.
Drying Cycles: Normal, Heavy Duty, Delicates, Quick Dry, Air Fluff, Steam Refresh.
Control Type: Electronic with digital display.
Door: Reversible, front-loading.
Color: White.
Warranty: 1-year limited parts and labor.

Controls and Settings

Control Panel: POWER, START/PAUSE, CYCLE SELECTOR, TEMPERATURE, OPTIONS, CHILD LOCK.

Display: Shows selected cycle, time remaining, temperature, and status icons.

Cycle Selection: Turn knob to choose cycle (Normal, Heavy Duty, Delicates, Quick Dry, Air Fluff, Steam Refresh). Temperature: Adjust with TEMP button (High, Medium, Low, No Heat). Options: Wrinkle Prevent, End-of-Cycle Signal, Sound settings. Child Lock: Press and hold CHILD LOCK for 3 seconds to enable/disable.

Connecting to Power

Requires dedicated 240V outlet (NEMA 14-30R).

Turn off power at circuit breaker before connecting.
Use 4-prong power cord (included).
Connect cord to dryer terminal block (follow wiring diagram).
Plug into outlet, restore power at breaker.

Tip: Have a qualified electrician install outlet if not present. Do not use extension cord.

Using Drying Cycles

Supports various fabrics and load sizes.

Load laundry: Do not overload; leave space for tumbling.
Select cycle: Turn knob to desired cycle.
Adjust temperature: Press TEMP to choose setting.
Add options: Select Wrinkle Prevent or other options if needed.
Start: Press START/PAUSE; display shows time remaining.
Pause/stop: Press START/PAUSE to pause; press again to resume. To cancel, hold for 3 seconds.
Unload promptly: Remove items immediately after cycle to reduce wrinkles.

WARNING! Clean lint filter before every load. Do not dry items stained with chemicals or flammable substances.

Special Features

Sensor Dry: Automatically adjusts drying time based on moisture. Steam Refresh: Reduces wrinkles and freshens clothes (add water to reservoir). Wrinkle Prevent: Tumbles intermittently for up to 3 hours after cycle.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every load. Wipe exterior with damp cloth; do not use abrasive cleaners.

Monthly: Check and clean exhaust vent. Clean drum with mild detergent if needed.

CAUTION! Do not spray water or cleaners directly onto controls. Keep area around dryer free of lint and debris.

Regulatory Information

UL listed; complies with U.S. safety standards. Energy Star certified. Copyright © Samsung Electronics Co., Ltd. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power/ door	Ensure power is on; door is fully closed; circuit breaker not tripped.
No heat	Settings/ vent	Check temperature setting (not on Air Fluff); ensure vent is not blocked.
Clothes too wet	Overload/ sensor	Reduce load size; clean lint filter; ensure Sensor Dry is selected.
Excessive noise	Leveling/ objects	Check leveling feet; remove foreign objects from drum.
Error code on display	Various	Refer to error code chart in manual; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-SAMSUNG; www.samsung.com/us/support