samsung dryer dve50bg8300v manual

The Samsung DVE50BG8300V is a 7.4 cu. ft. Electric Dryer with Sensor Dry technology, Steam Sanitize+ cycle, Wrinkle Away option, and Wi-Fi connectivity. It features multiple drying cycles, adjustable temperature settings, a reversible door, and an interior drum light. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power & Venting 7. Using Dryer Cycles 8. Smart Features & Connectivity 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large capacity drum, Control Panel with LED display, Lint filter, Reversible door, Steam nozzle, Power cord inlet, Exhaust vent.

FeatureDescription
Sensor Dry TechnologyAutomatically senses moisture and adjusts drying time
Steam Sanitize+Uses steam to reduce allergens and wrinkles
Wrinkle Away OptionTumbles clothes periodically after cycle to reduce wrinkles
Wi-Fi ConnectivityConnect to SmartThings app for remote control and alerts
Reversible DoorDoor can be hinged on left or right side
Interior Drum LightIlluminates drum interior for easy loading/unloading
Multiple Drying CyclesCotton, Permanent Press, Delicates, Quick Dry, etc.
Adjustable TemperatureHigh, Medium, Low, Air Fluff settings
Child LockLocks control panel to prevent accidental changes
End of Cycle SignalAudible alert when drying is complete

Installation

Unpack and inspect contents. Place on level floor near power outlet and venting.

  1. Remove shipping materials: Tape, bolts, and brackets from drum and door.
  2. Level the dryer: Adjust leveling feet to ensure dryer is stable.
  3. Connect venting: Attach 4-inch diameter rigid metal duct to exhaust vent.
  4. Connect power: Plug into dedicated 240V, 30-amp electrical outlet.
  5. Test operation: Run a test cycle to ensure proper installation.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding and venting to prevent fire hazard.

First-Time Setup

After installation, configure initial settings.

  1. Select language: Press and hold Settings button to choose display language.
  2. Set time: Use numeric pad to enter current time.
  3. Connect to Wi-Fi: Navigate to Smart Settings to connect to home network.
  4. Run calibration cycle: Select "Sensor Dry" on a small load for system calibration.

CAUTION! Ensure venting is clear and exhausts outdoors. Do not use plastic or flexible foil vent material.

Specifications

Controls and Settings

Access settings via control panel. Power Button: Turns dryer on/off. Cycle Selector: Choose drying cycle (Cotton, Permanent Press, Delicates, etc.). Temperature: Adjust heat level (High, Medium, Low, Air Fluff). Options: Steam, Wrinkle Away, Delay Start, Child Lock.

Display: Shows cycle time, settings, and status messages. Settings Menu: Language, Time, Signal Volume, Wi-Fi Setup, Factory Reset.

Smart Features: Connect to SmartThings app for remote start/stop, cycle monitoring, and diagnostic alerts.

Connecting to Power & Venting

Power: Dedicated 240V outlet. Venting: Rigid metal duct to outdoors.

  1. Turn off circuit breaker before connecting power.
  2. Use proper gauge power cord (not included).
  3. Secure vent duct with clamps; avoid sharp bends.
  4. Keep vent clear of lint buildup.

Tip: Clean lint filter before every load and inspect venting annually.

Using Dryer Cycles

Supports various fabrics and drying needs.

  1. Load clothes: Do not overload; leave space for tumbling.
  2. Select cycle: Turn cycle selector to desired setting.
  3. Adjust settings: Set temperature, dryness level, and options.
  4. Start: Press Start/Pause button.
  5. Steam cycles: Add water to reservoir for Steam Sanitize+ or Wrinkle Away.
  6. Delay Start: Set later start time if needed.
  7. End of cycle: Remove clothes promptly to reduce wrinkles.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter after every cycle.

Smart Features & Connectivity

Wi-Fi Setup: Connect dryer to home network via SmartThings app. Remote Control: Start, stop, monitor cycles from smartphone. Notifications: Receive alerts for cycle completion, maintenance reminders. Diagnostics: App provides troubleshooting tips and error code explanations.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; use mild detergent if needed. Clean lint filter after every load. Monthly: Vacuum lint from vent opening and around drum seal. Annually: Inspect and clean entire venting system.

CAUTION! Do not use abrasive cleaners or solvents. Ensure dryer is cool before cleaning.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC rules. UL Listed: Meets safety standards. Energy Star: Certified for energy efficiency. Copyright © Samsung Electronics. For support, visit www.samsung.com or contact 1-800-SAMSUNG.

Troubleshooting

SymptomPossible CauseCorrective Action
Dryer won't startPower, door, settingsEnsure plugged in, door closed, Start button pressed; check circuit breaker.
Clothes not dryingLint, venting, settingsClean lint filter; check vent for blockage; select correct temperature/cycle.
Unusual noiseObjects in drum, installationCheck for coins/objects; ensure dryer is level; tighten shipping bolts if removed.
Error codes on displaySensor, heating, drainageRefer to manual for specific code; reset dryer; check venting and power.
Steam function not workingWater reservoir, cycleEnsure reservoir is filled; select a steam-enabled cycle; check water supply connection.

Reset: Unplug for 1 minute, or use Factory Reset in Settings menu.

Service: 1-800-SAMSUNG; www.samsung.com/support

Samsung DVE50BG8300V Dryer Manual © - All Rights Reserved 2025