samsung dryer dve45t3400p/a3 manual

The Samsung DVE45T3400P/A3 is an electric dryer with a 7.5 cu. ft. capacity, featuring Sensor Dry technology, Wrinkle Guard, Steam Refresh, multiple drying cycles, and a reversible door. It is designed for home use with a 240V electrical connection. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Drum, Lint Filter, Exhaust Vent, Reversible Door, Power Cord.

Installation

Unpack and inspect contents. Place on a level, stable floor near a 240V outlet and proper venting.

1. Remove shipping materials: Remove all tape, bolts, and foam from drum and interior.
2. Level the dryer: Adjust the leveling feet to ensure the dryer is stable and does not rock.
3. Connect venting: Attach a 4-inch diameter rigid metal or flexible metal duct to the exhaust outlet at the rear. Ensure the vent path is as short and straight as possible.
4. Electrical connection: Have a qualified electrician connect the 4-prong power cord (provided) to a dedicated 240V, 30-amp circuit.
5. Door reversal (optional): Follow instructions in manual to change door hinge side if needed.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding and venting to prevent fire hazard.

First-Time Setup

After installation, perform initial setup before first use.

1. Clean lint filter: Remove and clean the lint filter with warm water, dry completely, and reinstall.
2. Run an empty cycle: Select the "Air Fluff" or "Timed Dry" cycle and run for 20 minutes to burn off any manufacturing residues.
3. Set preferences: Use the control panel to set options like End Signal volume and Control Lock.
4. Load laundry: Do not overload. Follow fabric care labels.

CAUTION! Ensure the dryer is properly leveled and vented before operation.

Specifications

• Model: DVE45T3400P/A3
• Type: Electric Dryer
• Capacity: 7.5 cu. ft.
• Color: Platinum
• Control: Electronic with LED Display
• Drying Technology: Sensor Dry, Steam
• Cycles: 12+ including Cotton, Quick Dry, Delicates, Bedding
• Power Requirements: 240V AC, 60Hz, 30 Amp dedicated circuit
• Venting: 4-inch diameter exhaust
• Dimensions (HxWxD): Approximately 44" x 29" x 33"

Controls and Settings

Access functions via the control panel. Main buttons: POWER, START/PAUSE, STOP.

Cycle Selector Knob: Turn to choose a drying cycle (Cotton, Permanent Press, Delicates, Bedding, Quick Dry, Air Fluff, etc.).

Touch Buttons: Options include Temp (High, Medium, Low, No Heat), Dryness Level (More Dry, Less Dry), Time Dry (set custom minutes), Wrinkle Guard, Steam Refresh, Signal, and Control Lock.

Display: Shows selected cycle, remaining time, status messages, and options.

Settings Menu: Hold certain buttons to access settings for End Signal volume, buzzer, and factory reset.

Connecting to Power & Venting

Proper electrical and venting connections are critical for safety and performance.

1. Turn off power at the circuit breaker before making any electrical connections.
2. Use only a 4-prong, 240V, 30-amp power cord rated for this dryer.
3. Connect the vent duct securely to the dryer's rear exhaust outlet and to an exterior wall vent hood. Use clamps. Avoid plastic or foil accordion-style ducts.
4. Ensure the exterior vent flap opens freely when the dryer is running.

Tip: Clean the entire venting system annually to maintain efficiency and prevent fire risk.

Using Dryer Cycles

Select a cycle based on fabric type and desired dryness.

1. Load laundry: Do not overload. Separate heavy items from light ones.
2. Select cycle: Turn knob to desired cycle (e.g., Cotton, Permanent Press).
3. Adjust settings: Press Temp, Dryness Level, or Time Dry to customize.
4. Add options: Press Wrinkle Guard or Steam Refresh if desired.
5. Start: Press START/PAUSE. The display will show estimated time.
6. During cycle: You can pause to add or remove an item. Press START/PAUSE again to resume.
7. End of cycle: Remove clothes promptly to minimize wrinkles. Clean the lint filter.

WARNING! Do not dry items that have been in contact with flammable substances. Do not block airflow around the dryer.

Special Features

Sensor Dry: Automatically stops when the desired dryness level is reached, saving energy.

Wrinkle Guard: After the cycle ends, the drum tumbles periodically for up to 150 minutes if clothes are not removed.

Steam Refresh: Use for a 20-minute cycle to reduce wrinkles and odors on up to 3 lightweight items. Requires adding water to the designated reservoir.

Control Lock: Press and hold Control Lock for 3 seconds to lock/unlock the control panel, preventing accidental changes.

Care & Cleaning

Regular maintenance ensures optimal performance and safety.

1. Lint Filter: Clean before EVERY load. Remove lint, and periodically wash the filter with warm water.
2. Exhaust Vent: Inspect and clean the entire duct system at least once a year.
3. Exterior: Wipe with a soft, damp cloth. Do not use abrasive cleaners.
4. Drum: Wipe interior with a damp cloth to remove any residue. Run an "Air Fluff" cycle with a dryer-safe cleaning cloth if needed.
5. Moisture Sensors: Occasionally wipe the inside of the drum where the moisture sensors are located with a soft cloth to ensure accuracy.

CAUTION! Always unplug the dryer or turn off power at the breaker before cleaning internal areas. Never use harsh chemicals.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Manufactured under license from Samsung Electronics Co., Ltd. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Reset: Unplug the dryer for 1 minute, then plug back in to reset the control board.

Service: 1-800-SAMSUNG (1-800-726-7864); www.samsung.com/us/support