The Samsung Bespoke Washer Dryer is an all-in-one laundry solution featuring AI-powered Smart Dial, Super Speed Wash, Steam Sanitize+, Energy Star certification, Wi-Fi connectivity via SmartThings app, AddWash door, Digital Inverter Motor, and customizable front panels. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: AI Smart Dial, AddWash door, Digital Inverter Motor, Steam function, Wi-Fi module, detergent dispenser, lint filter, control panel.
| Feature | Description |
|---|---|
| AI Smart Dial | Automatically recommends optimal cycles based on load |
| Super Speed Wash | Completes full wash in under 30 minutes |
| Steam Sanitize+ | Reduces 99.9% of bacteria and allergens |
| AddWash Door | Allows adding forgotten items mid-cycle |
| Digital Inverter Motor | Quiet operation with 20-year warranty |
| SmartThings App | Remote control and monitoring via smartphone |
| Energy Star Certified | Energy-efficient operation |
| Customizable Panels | Interchangeable front panels to match kitchen decor |
| EcoBubble Technology | Dissolves detergent for better cleaning at low temperatures |
| Self Clean+ | Automatically cleans the drum and detergent drawer |
Unpack and inspect contents. Ensure location meets requirements.
WARNING! Unit is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.
Power on the washer dryer; follow initial setup prompts.
CAUTION! Ensure unit is level before first use to prevent excessive vibration.
Access controls via touch display or SmartThings app. Front Panel: POWER, START/PAUSE, AI SMART DIAL, STEAM, ADDWASH.
Display: Shows cycle progress, time remaining, settings. Touch to select cycles, temperature, spin speed, dry level, and options.
Cycles: COTTON, SYNTHETICS, DELICATES, BEDDING, SPORT, QUICK WASH, STEAM SANITIZE, SELF CLEAN+. Settings: Temperature (Cold to 90°C), Spin Speed (No Spin to 1400 RPM), Dry Level (Extra Low to Extra High), Delay Start (up to 24 hours), Child Lock, Sound On/Off.
Enables remote control, cycle monitoring, and notifications.
Tip: Keep firmware updated via app for latest features and improvements.
Supports various fabric types and soil levels.
WARNING! Do not overload drum. Follow fabric care labels. Clean lint filter after every drying cycle.
Regular maintenance ensures optimal performance and longevity.
CAUTION! Unplug before cleaning. Use only mild, non-abrasive cleaners. Do not use bleach on stainless steel surfaces.
FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Energy Star Partner. Copyright © 2024 Samsung Electronics Co., Ltd. All rights reserved. Samsung and Bespoke are trademarks of Samsung Electronics Co., Ltd. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Unit won't power on | Power supply | Check if plugged in; ensure outlet works; check circuit breaker. |
| No water filling | Water supply | Ensure water valves are open; check hoses for kinks; clean inlet filters. |
| Excessive vibration/noise | Leveling/load | Re-level unit; redistribute load evenly; remove transit bolts. |
| Error codes on display | Various | Refer to error code chart in manual; common codes: 4E (water supply), dE (door), tE (temperature). |
| Clothes still wet after drying | Lint filter/cycle | Clean lint filter; select higher dry level; ensure adequate ventilation. |
| SmartThings connection failed | Wi-Fi/network | Check Wi-Fi signal; restart router; re-pair device in app. |
| Detergent not dispensing | Drawer clogged | Clean detergent drawer with warm water; use recommended detergent amount. |
Reset: Unplug for 1 minute, then restart. For persistent issues, use diagnostic mode (hold Temp + Spin buttons for 3 seconds).
Service: 1-800-SAMSUNG; www.samsung.com/us/support