Samsung Dryer DVE50R5200W/A3 Manual

The Samsung DVE50R5200W/A3 is an electric dryer with a 7.5 cu. ft. capacity, featuring Sensor Dry technology, Wrinkle Guard, Steam Refresh, multiple drying cycles, and a reversible door. It includes safety features like a high-temperature cutoff switch and a lint filter indicator. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Drying Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Drum, Lint Filter, Reversible Door, Venting System, Power Cord.

Feature	Description
Sensor Dry	Automatically senses moisture and adjusts drying time
Wrinkle Guard	Tumbles clothes periodically after cycle ends to reduce wrinkles
Steam Refresh	Uses steam to reduce wrinkles and odors on lightly worn clothes
Reversible Door	Door can be hinged on left or right side
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry, etc.
Lint Filter Indicator	Reminds you to clean the lint filter
Control Lock	Prevents accidental changes to settings
End of Cycle Signal	Audible signal when drying is complete
Drum Light	Interior light for easier loading/unloading
ENERGY STAR® Certified	Meets energy efficiency guidelines

Installation

Unpack and inspect contents. Ensure location is level and well-ventilated.

Remove shipping materials: Take off tape, bolts, and foam blocks from drum and door.
Level the dryer: Adjust leveling feet so dryer is stable and does not rock.
Connect venting: Use rigid or flexible metal ducting (not plastic). Keep vent run as short and straight as possible.
Connect power: Plug into dedicated 240V, 30-amp outlet (for electric model).
Test operation: Run a short cycle to ensure proper installation.

WARNING! Dryer is heavy; use two people to move. Ensure proper grounding and venting to prevent fire hazard.

First-Time Setup

After installation, configure initial settings.

Select language: Press and hold Control Lock and Temp. buttons for 3 seconds, then choose language.
Set door direction (if needed): Follow instructions in manual to reverse door hinge.
Run initial cycle: Run an empty cycle on Normal Dry to clear any dust from manufacturing.
Familiarize with controls: Review cycle options and settings.

CAUTION! Ensure all packing materials are removed before first use to avoid damage.

Specifications

Model: DVE50R5200W/A3
Type: Electric Dryer
Capacity: 7.5 cu. ft.
Dimensions (HxWxD): 44.5" x 29.5" x 32.5"
Voltage: 240V AC, 60Hz
Amperage: 30 A
Venting: 4-inch diameter exhaust
Control Type: Electronic with LED display
Color: White
Warranty: 1-year full warranty, 10-year limited warranty on drum

Controls and Settings

Control Panel: POWER, START/PAUSE, Cycle Selector Knob, Temp. button, Dryness Level button, Options buttons (Wrinkle Guard, Signal, etc.), Control Lock.

Cycles: Normal, Heavy Duty, Permanent Press, Delicates, Quick Dry, Air Fluff, Steam Refresh, Sanitize, etc.

Settings: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Less Dry, etc.), Options (Wrinkle Guard On/Off, Signal On/Off, Control Lock).

Connecting to Power

Electric: Requires dedicated 240V, 30-amp outlet with proper grounding.

Turn off power at circuit breaker before connecting.
Use 4-prong power cord (included or purchased separately).
Connect wires to terminal block: Follow wiring diagram in manual (L1, L2, N, G).
Secure strain relief.
Restore power and test.

Tip: Have a qualified electrician perform electrical connections if unsure.

Using Drying Cycles

Supports various fabrics and drying needs.

Load clothes: Do not overload; leave space for tumbling.
Select cycle: Turn knob to desired cycle (e.g., Normal for cottons).
Adjust settings: Press Temp. and Dryness Level buttons as needed.
Select options: Press Wrinkle Guard, Signal, etc.
Start: Press START/PAUSE. Cycle time will display.
Pause/Stop: Press START/PAUSE to pause; press again to resume. To cancel, press and hold START/PAUSE for 3 seconds.
Unload promptly: Remove clothes when cycle ends to minimize wrinkles.

WARNING! Do not dry items containing foam, rubber, or plastic (e.g., pillows, tennis shoes) unless labeled as dryer-safe.

Special Features

Sensor Dry: Automatically adjusts time based on moisture. Wrinkle Guard: Tumbles clothes without heat after cycle ends. Steam Refresh: Reduces wrinkles and odors in 20-30 minutes. Control Lock: Prevents children from changing settings.

Care & Cleaning

Unplug before cleaning. Clean lint filter before every load. Wipe interior and exterior with damp cloth. Clean venting system annually.

CAUTION! Do not use abrasive cleaners. Ensure lint filter and vent are clean to prevent fire hazard.

Regulatory Information

UL Listed; complies with U.S. safety standards. ENERGY STAR® certified. Copyright © Samsung Electronics America, Inc. For support, visit www.samsung.com/us/support or contact 1-800-SAMSUNG (1-800-726-7864).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door not closed, power issue, Control Lock on	Close door firmly, check power outlet and breaker, turn off Control Lock.
No heat	Cycle set to No Heat, heating element issue	Select a cycle with heat, check circuit breaker, call for service if needed.
Clothes too wet after cycle	Overloaded, lint filter clogged, improper settings	Reduce load size, clean lint filter, select higher dryness level.
Unusual noise	Foreign object in drum, shipping bolts not removed	Check drum for objects, ensure all shipping materials are removed.
Error codes (e.g., tE, dE)	Thermal cutoff, door switch issue	Unplug for 1 minute, plug back in. If error persists, call for service.

Reset: Unplug for 1 minute to reset electronic controls.

Service: 1-800-SAMSUNG; www.samsung.com/us/support