DV42H5600EP/A3 Samsung Dryer Manual

The Samsung DV42H5600EP/A3 is a 7.4 cu. ft. Electric Dryer with Sensor Dry technology, Steam Refresh cycle, Wrinkle Prevent option, Eco Dry mode, and multiple drying cycles. It features a durable stainless steel drum, LED display, end-of-cycle signal, and venting options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Dryer Cycles 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with LED display, Stainless steel drum, Lint filter, Steam nozzle, Venting system, Power cord.

Feature	Description
Sensor Dry technology	Automatically detects moisture levels for optimal drying
Steam Refresh cycle	Reduces wrinkles and odors without washing
Wrinkle Prevent option	Tumbles clothes periodically after cycle ends
Eco Dry mode	Reduces energy consumption
LED display	Shows cycle status, time remaining, and settings
Stainless steel drum	Durable and resistant to rust
Lint filter	Removable for easy cleaning
End-of-cycle signal	Audible alert when drying is complete
Multiple drying cycles	Cotton, Permanent Press, Delicates, Quick Dry, etc.
Temperature settings	High, Medium, Low, Air Fluff

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Remove tape, bolts, and brackets from drum and door.
Connect venting: Use 4-inch diameter rigid metal duct; avoid plastic or foil.
Level the dryer: Adjust leveling feet to ensure dryer is stable.
Connect power: Plug into dedicated 240V outlet (for electric model).

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

After installation, perform initial setup.

Clean lint filter: Remove and clean filter before first use.
Select language: Press OPTIONS to set display language (default ENGLISH).
Run empty cycle: Run a quick cycle to remove any dust or residues.
Set preferences: Configure end-of-cycle signal, default temperature, etc.

CAUTION! Ensure dryer is properly leveled to prevent vibration and noise.

Specifications

Capacity: 7.4 cubic feet.
Power Requirements: 240V, 60Hz, 30A (electric model).
Dryer Type: Electric vented dryer.
Control Type: Electronic with LED display.
Drum Material: Stainless steel.
Cycles: Sensor Dry, Steam Refresh, Wrinkle Prevent, Eco Dry, Cotton, Permanent Press, Delicates, Quick Dry, Air Fluff.
Temperature Settings: High, Medium, Low, Air Fluff.
Dimensions: Standard dryer size (refer to manual for exact measurements).
Weight: Approximately 130 lbs.

Controls and Settings

Access settings via control panel. Power Button: Turns dryer on/off. Cycle Selector: Choose drying cycle. Temperature Button: Adjust heat level (High, Medium, Low, Air Fluff). Options Button: Access additional features (Wrinkle Prevent, Signal Volume, Eco Dry). Start/Pause Button: Start or pause cycle.

LED Display: Shows selected cycle, time remaining, temperature, and options.

Cycle Settings: Adjust time, temperature, dryness level for each cycle. Options: Wrinkle Prevent (On/Off), End Signal (Volume), Eco Dry (On/Off), Child Lock. Steam Settings: Configure Steam Refresh cycle duration and intensity.

Connecting to Power

Electric model requires 240V outlet.

Turn off power at circuit breaker before connecting.
Use proper power cord: 4-prong cord for 240V outlet.
Connect to dedicated outlet: Ensure outlet matches dryer requirements.
Secure connections: Tighten all electrical connections.

Tip: Have a qualified electrician install outlet if not already present.

Using Dryer Cycles

Supports various fabrics and drying needs.

Load dryer: Place clothes evenly in drum; do not overload.
Select cycle: Turn cycle selector to desired cycle (e.g., Cotton, Permanent Press).
Adjust settings: Press TEMPERATURE to set heat; press OPTIONS for additional features.
Start cycle: Press START/PAUSE; LED shows time remaining.
Add steam: For Steam Refresh, add water to reservoir and select cycle.
Pause/stop: Press START/PAUSE to pause; turn cycle selector to OFF to stop.
Remove clothes: Promptly remove clothes after cycle to reduce wrinkles.
Clean lint filter: Clean after every cycle for optimal performance.

WARNING! Do not dry items containing foam, rubber, or plastic; risk of fire.

Maintenance & Cleaning

Unplug before cleaning. Clean lint filter after every use. Wipe exterior with damp cloth; do not use abrasive cleaners. Check venting system annually for blockages.

CAUTION! Do not use harsh chemicals; keep dryer area free of lint buildup.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power/door	Ensure dryer is plugged in; check circuit breaker; close door securely.
Clothes not drying	Lint/venting	Clean lint filter; check vent for blockages; select proper cycle.
Excessive vibration	Leveling/load	Level dryer; balance load; remove shipping materials.
Error codes on display	Sensor/issues	Refer to manual for code meaning; reset dryer; call service if persistent.
Steam cycle not working	Water/reservoir	Ensure water reservoir is filled; check for clogs in steam nozzle.

Reset: Unplug for 1 minute to reset electronic controls.

Service: 1-800-SAMSUNG; www.samsung.com/us/support