DV42H5000GW/A3 Samsung Dryer Manual

The Samsung DV42H5000GW/A3 is a 7.4 cu. ft. Electric Dryer with Sensor Dry technology, Wrinkle Guard, Eco Dry option, and multiple drying cycles. It features a durable stainless steel drum, reversible door, end-of-cycle signal, and child lock. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using Dryer Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Stainless Steel Drum, Lint Filter, Exhaust Vent, Reversible Door, Power Cord.

Feature	Description
Sensor Dry	Automatically detects moisture and adjusts drying time
Wrinkle Guard	Tumbles clothes periodically after cycle ends to reduce wrinkles
Eco Dry	Energy-saving drying option
Stainless Steel Drum	Durable and gentle on fabrics
Reversible Door	Can be hinged on left or right side
Child Lock	Locks control panel to prevent accidental changes
End-of-Cycle Signal	Audible alert when drying is complete
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry, etc.
Temperature Settings	High, Medium, Low, Air Fluff (no heat)
Lint Filter Alert	Reminder to clean lint filter

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Remove all tapes, brackets, and foam from drum and interior.
Connect exhaust vent: Use 4-inch diameter rigid metal ducting; keep vent run as short and straight as possible.
Level the dryer: Adjust leveling feet to ensure dryer is stable and does not rock.
Connect power: Plug into dedicated 240V, 30-amp electrical outlet (for electric model).

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

After installation, perform initial setup.

Clean lint filter: Remove and clean lint filter before first use.
Run empty cycle: Run a quick air fluff cycle to remove any dust from manufacturing.
Set preferences: Use control panel to set signal volume, child lock, and other defaults.
Test sensor dry: Load a small load and run Sensor Dry cycle to ensure proper operation.

CAUTION! Do not use without removing shipping materials. Ensure exhaust vent is securely attached.

Specifications

Model: DV42H5000GW/A3
Type: Electric Dryer
Capacity: 7.4 cubic feet
Dimensions (HxWxD): 44.5" x 29.5" x 32.1"
Voltage: 240V AC
Amperage: 30A
Drum Material: Stainless Steel
Control Type: Electronic with LED display
Color: White
Warranty: 1-year limited parts and labor

Controls and Settings

Control Panel: Power button, Cycle selector knob, Temperature button, Options buttons (Wrinkle Guard, Eco Dry, Signal), Start/Pause button.

Cycles: Cotton, Permanent Press, Delicates, Quick Dry, Bedding, Heavy Duty, Sanitize, Air Fluff.

Temperature Settings: High, Medium, Low, Air Fluff (no heat). Options: Wrinkle Guard (On/Off), Eco Dry (On/Off), Signal (Off/Low/High), Child Lock (hold Temp and Signal for 3 seconds).

Connecting to Power

Electric models require 240V, 30-amp dedicated circuit.

Turn off power at circuit breaker before connecting.
Use proper power cord: 4-prong cord (NEMA 14-30R) for new installations.
Secure connections: Ensure all electrical connections are tight and correct.
Restore power and test: Turn on breaker and run a test cycle.

Tip: Have installation performed by qualified electrician if unsure.

Using Dryer Cycles

Select appropriate cycle for fabric type.

Load dryer: Do not overload; clothes need room to tumble.
Select cycle: Turn knob to desired cycle (e.g., Cotton).
Set temperature: Press Temp button to choose heat level.
Set options: Press Wrinkle Guard, Eco Dry, or Signal as desired.
Start: Press Start/Pause button; display shows remaining time.
Pause/Stop: Press Start/Pause to pause; press and hold to cancel cycle.
Clean lint filter: Clean after every load for efficiency and safety.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter regularly to prevent fire.

Special Features

Sensor Dry: Automatically adjusts time based on moisture; ensures clothes are not over-dried. Wrinkle Guard: Tumbles clothes without heat for up to 3 hours after cycle ends. Eco Dry: Reduces energy consumption by using lower temperatures. Child Lock: Prevents accidental cycle changes.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean lint filter after every load. Check and clean exhaust vent quarterly.

CAUTION! Do not use abrasive cleaners. Ensure dryer is disconnected from power during maintenance.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power, door, settings	Ensure power is on; door fully closed; Start button pressed; circuit breaker not tripped.
Clothes not drying	Lint filter, vent, settings	Clean lint filter; check vent for blockage; ensure correct temperature selected.
Dryer is noisy	Objects in drum, installation	Check for coins, buttons in drum; ensure dryer is level; check for loose parts.
Error codes on display	Sensor issues, overheating	Refer to error code chart in manual; unplug for 5 minutes to reset; check vent restriction.
Wrinkle Guard not working	Option not selected	Ensure Wrinkle Guard is turned on in options before starting cycle.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-SAMSUNG; www.samsung.com/us/support